K. Abe, H. Takahashi, H. Churei, N. Iwasaki, and T. Ueno, Flexural properties and shockabsorbing capabilities of new face guard materials reinforced with fiberglass cloth, Dent Traumatol. 2013 Feb, vol.29, issue.1, pp.23-31

A. Society and M. Testing, Standard practice for care and use of mouthguards. Designation F697 80, p.323, 1986.

A. Society and M. Testing, Standard practice for care and use of athletic mouth protectors, ): American Society for Testing and Materials, 2000.

P. Auroy, P. Duchatelard, N. Zmantar, and M. Hennequin, Hardness and shock absorption of silicone rubber for mouth guards, The Journal of Prosthetic Dentistry, vol.75, issue.4, pp.463-71, 1996.
DOI : 10.1016/S0022-3913(96)90045-1

J. Barou, P. Viot, and P. Poisson, Experimental Study of Mouth Guards Response under Impact Loading, Applied Mechanics and Materials, vol.83, pp.78-84, 2011.
DOI : 10.4028/www.scientific.net/AMM.83.78

P. Bemelmanns and P. Pfeiffer, Shock Absorption Capacities of Mouthguards in Different Types and Thicknesses, International Journal of Sports Medicine, vol.22, issue.2, pp.149-53, 2001.
DOI : 10.1055/s-2001-11342

A. Bhalla, N. Grewal, U. Tiwari, V. Mishra, N. Mehla et al., Shock absorption ability of laminate mouth guards in two different malocclusions using fiber Bragg grating (FBG) sensor, Dental Traumatology, vol.31, issue.3, pp.218-243
DOI : 10.1111/j.1600-9657.2012.01159.x

N. Biasca, S. Wirth, and Y. Tegner, The avoidability of head and neck injuries in ice hockey: an historical review, British Journal of Sports Medicine, vol.36, issue.6, pp.410-437, 2002.
DOI : 10.1136/bjsm.36.6.410

B. Bishop, E. Davies, and J. Von-fraunhofer, Materials for mouth protectors, The Journal of Prosthetic Dentistry, vol.53, issue.2, pp.256-61, 1985.
DOI : 10.1016/0022-3913(85)90123-4

K. Bücher, C. Neumann, R. Hickel, and J. Kühnisch, Traumatic dental injuries at a German University Clinic 2004-2008, Dental Traumatology, vol.23, issue.2, pp.127-160, 2004.
DOI : 10.1111/j.1600-9657.2012.01149.x

Y. Bulsara and I. Matthew, Forces transmitted through a laminated mouthguard material with a Sorbothane insert, Dental Traumatology, vol.222, issue.1, pp.45-47, 1998.
DOI : 10.1111/j.1600-9657.1993.tb00262.x

D. Camarillo, P. Shull, J. Mattson, R. Shultz, and D. Garza, An Instrumented Mouthguard for Measuring Linear and Angular Head Impact Kinematics in American Football, Annals of Biomedical Engineering, vol.40, issue.8, pp.1939-1988, 2013.
DOI : 10.1007/s10439-013-0801-y

J. Castro, W. Poi, T. Manfrin, and L. Zina, Analysis of the crown fractures and crown-root fractures due to dental trauma assisted by the Integrated Clinic from 1992 to 2002, Dental Traumatology, vol.13, issue.3, pp.121-126, 1992.
DOI : 10.1034/j.1600-9657.2001.017003109.x

S. Chaconas, A. Caputo, and N. Bakke, A comparison of athletic mouthguard materials, The American Journal of Sports Medicine, vol.13, issue.3, pp.193-200, 1985.
DOI : 10.1177/036354658501300309

P. Chapman, Mouthguards and the role of Sporting Team Dentists, Australian Dental Journal, vol.11, issue.1, pp.36-43, 1989.
DOI : 10.1111/j.1834-7819.1989.tb03003.x

R. Craig and W. Godwin, Physical properties of materials for custom-made mouth protectors, J Mich State Dent Assoc, vol.49, pp.34-40, 1967.

R. Craig and W. Godwin, Properties of athletic mouth protectors and materials, Journal of Oral Rehabilitation, vol.29, issue.2, pp.146-150, 200229.
DOI : 10.1046/j.1365-2842.2002.00831.x

D. Wet, F. Heyns, M. Pretorius, and J. , Shock absorption potential of different mouth guard materials, The Journal of Prosthetic Dentistry, vol.82, issue.3, p.301, 1999.
DOI : 10.1016/S0022-3913(99)70084-3

D. Rossi, G. Leyte-vidal, and M. , Fabricating a better mouthguard. Part I: Factors influencing mouthguard thinning, Dental Traumatology, vol.40, issue.3, pp.149-154, 2007.
DOI : 10.1034/j.1600-9657.2002.180103.x

D. Duarte-pereira, D. Rey-santamaria, M. Javierre-garcés, C. Barbany-cairó, J. Paredes-garcia et al., Wearability and physiological effects of custom-fitted vs self-adapted mouthguards, Dental Traumatology, vol.15, issue.4, pp.439-481, 2008.
DOI : 10.1111/j.1600-9657.2008.00595.x

C. Duhaime, C. Whitmyer, R. Butler, and B. Kuban, Comparison of forces transmitted through different EVA mouthguards, Dental Traumatology, vol.42, issue.4, pp.186-192, 2006.
DOI : 10.1016/S0022-3913(99)70084-3

R. Going, R. Loehman, and M. Chan, Mouthguard materials: their physical and mechanical properties, The Journal of the American Dental Association, vol.89, issue.1, pp.132-138, 1974.
DOI : 10.14219/jada.archive.1974.0354

T. Gould, S. Piland, J. Shin, C. Hoyle, and S. Nazarenko, Characterization of mouthguard materials: Physical and mechanical properties of commercialized products, Dental Materials, vol.25, issue.6, pp.771-80, 2009.
DOI : 10.1016/j.dental.2008.12.005

A. Greasley, G. Imlach, and B. Karet, Application of a standard test to the in vitro performance of mouthguards, British Journal of Sports Medicine, vol.32, issue.1, pp.17-19, 1998.
DOI : 10.1136/bjsm.32.1.17

A. Greasley and B. Karet, Towards the development of a standard test procedure for mouthguard assessment, British Journal of Sports Medicine, vol.31, issue.1, pp.31-35, 1997.
DOI : 10.1136/bjsm.31.1.31

S. Guérard, J. Barou, and P. Poisson, Characterization of mouth-formed mouthguards: impact performances and wearability. 4 pages. (Ressource électronique) Disponible sur : http://icills2014, 2014.

P. Guevara, S. Hondrum, and R. Reich, A comparison of commercially available mouthguards and a custom mouthguard, Gen Dent, vol.49, issue.4, pp.402-408, 2001.

J. Handa, T. Takeda, K. Kurokawa, T. Ozawa, K. Nakajima et al., Influence of pre-laminated material on shock absorption ability in specially designed mouthguard with hard insert and space, Journal of Prosthodontic Research, vol.55, issue.4, pp.214-234, 2011.
DOI : 10.1016/j.jpor.2011.02.003

J. Hickey, A. Morris, L. Carlson, and T. Seward, The relation of mouth protectors to cranial pressure and deformation, The Journal of the American Dental Association, vol.74, issue.3, pp.735-775, 1967.
DOI : 10.14219/jada.archive.1967.0145

J. Hoffmann, G. Alfter, N. Rudolph, and G. Goz, Experimental comparative study of various mouthguards, Dental Traumatology, vol.35, issue.4, pp.157-163, 1999.
DOI : 10.1111/j.1600-9657.1987.tb00620.x

K. Hunter, Practical tips, Dental Outlook, vol.15, pp.3-5, 1988.

I. Vivadent and S. , Technical doc : SR Ivocap, 2001.

R. Jagger, P. Milward, and M. Waters, Properties of an experimental mouthguard material, Int J Prosthodontics, vol.13, pp.416-425, 2000.

E. Kloeg and K. Collys, Matériaux pour protections dento-maxillaires intra-orale, Rev Belge Med Dent, issue.1, pp.21-33, 2003.

J. Knapik, S. Marshall, R. Lee, S. Darakjy, S. Jones et al., Mouthguards in Sport Activities, Sports Medicine, vol.15, issue.6, pp.117-161, 2007.
DOI : 10.2165/00007256-200737020-00003

R. Loehman, M. Chan, and R. Going, Optimization of materials for a user-formed mouthguard, Annals of Biomedical Engineering, vol.41, issue.2, pp.199-208, 1975.
DOI : 10.1007/BF02363071

D. Lunt, D. Mendel, W. Brantley, M. Beck, F. Huja et al., Impact energy absorption of three mouthguard materials in three environments, Dental Traumatology, vol.23, issue.1, pp.23-32, 2010.
DOI : 10.1111/j.1600-9657.2009.00848.x

M. Maeda, T. Takeda, K. Nakajima, M. Shibusawa, K. Kurokawa et al., In Search of Necessary Mouthguard Thickness. Part 1: From the Viewpoint of Shock Absorption Ability, Nihon Hotetsu Shika Gakkai Zasshi, vol.52, issue.2, pp.52211-219, 2008.
DOI : 10.2186/jjps.52.211

Y. Maeda, D. Kumamoto, K. Yagi, and K. Ikebe, Effectiveness and fabrication of mouthguards, Dental Traumatology, vol.19, issue.21, pp.556-564, 2009.
DOI : 10.1111/j.1600-9657.2009.00822.x

K. Mcglumphy, D. Mendel, B. Yilmaz, and J. Seidt, Pilot study of 3D image correlation photogrammetry to assess strain and deformation of mouthguard materials, Dental Traumatology, vol.23, issue.3, 2013.
DOI : 10.1111/edt.12076

T. Mekayarajjananonth, S. Winkler, and P. Wongthai, Improved mouth guard design for protection and comfort, The Journal of Prosthetic Dentistry, vol.82, issue.6, pp.627-657, 1999.
DOI : 10.1016/S0022-3913(99)70001-6

P. Milward and R. Jagger, Heat-cured silicone bimaxillary mouthguard, The Journal of Prosthetic Dentistry, vol.74, issue.4, pp.432-435, 1995.
DOI : 10.1016/S0022-3913(05)80388-9

M. Morikawa, H. Taniguchi, and T. Ohyama, Evaluation of athletic mouthguard through vibration test on maxillary teeth of human dry skull, J Med Dent Sci, vol.45, issue.1, pp.9-18, 1998.

P. Newsome, D. Tran, and M. Cooke, The role of the mouthguard in the prevention of sports-related dental injuries: a review, International Journal of Paediatric Dentistry, vol.188, issue.6, pp.396-404, 2001.
DOI : 10.1046/j.0960-7439.2001.00304.x

K. Oikarinen, M. Salonen, and J. Korhonen, Comparison of the guarding capacities of mouth protectors. Endod Dent Traumatol, pp.115-124, 1993.

M. Ou, H. Taniguchi, and T. Ohyama, Analysis on decay rate of vibration following impact to human dry skull with and without mouthguards, Bull Tokyo Med Dent Univ, vol.43, pp.13-24, 1996.

T. Ozawa, T. Takeda, K. Ishigami, K. Narimatsu, K. Hasegawa et al., Shock absorption ability of mouthguard against forceful, traumatic mandibular closure, Dental Traumatology, vol.24, issue.3, 2013.
DOI : 10.1111/edt.12063

R. Padilla, A technique for fabricating modern athletics mouthguards, Hawaii Dent J, vol.404, issue.6, pp.6-12, 2009.

R. Padilla, B. Dorney, and S. Balikov, Prevention of oral injuries, J Calif Dent Assoc, vol.24, issue.3, pp.30-36, 1996.

J. Park, K. Shaull, B. Overton, and K. Donly, Improving mouth guards, The Journal of Prosthetic Dentistry, vol.72, issue.4, pp.373-80, 1994.
DOI : 10.1016/0022-3913(94)90556-8

P. Piccininni, Typical dental injuries in ice hockey with and without face protection and recent advances in mouthguard design, Safety in ice hockey: Eighth International Symposium of the International Ice Hockey Federation IIHF. Zurich: IIHF, pp.95-103, 2000.

P. Poisson and H. Ohrensstein, Air-permeable adaptable mouthguard having clamped jaws, 2012.

P. Poisson, P. Viot, and J. Petit, Behavior under impact of two polyvinyl acetatepolyethylene (PVA-PE) polymers and one elastomer ? application to custom-made mouthguards, Dent Mater J, vol.28, issue.2, p.170177, 2009.

P. Poisson, R. Zunzarren, D. Villard, and R. , Protections intra-buccales : les différentes techniques de confection, Stratégie prothétique, vol.13, issue.2, pp.77-86, 2013.

P. Dental and S. R. , Technical doc : Corflex Orthodontic. Via Edoardo Collamarini 5

D. Ranalli, Prevention of sports-related traumatic dental injuries, Dent Clin North Am, vol.44, issue.1, pp.35-51, 2000.

D. Ranalli, Sports dentistry and dental traumatology, Dental Traumatology, vol.124, issue.5, pp.231-237, 2002.
DOI : 10.1002/(SICI)1098-108X(199703)21:2<195::AID-EAT11>3.0.CO;2-1

D. Ranalli, E. Spinas, and M. Altana, Méthodes innovatrices de prévention des traumatismes dento-faciaux, Clinic, vol.21, issue.7, pp.465-75, 2000.

R. Reed and . Jr, Origin and early history of the dental mouthpiece, British Dental Journal, vol.176, issue.12, pp.478-80, 1994.
DOI : 10.1038/sj.bdj.4808485

F. Reza, H. Churei, H. Takahashi, N. Iwasaki, and T. Ueno, Flexural impact force absorption of mouthguard materials using film sensor system, Dental Traumatology, vol.39, issue.3, 2013.
DOI : 10.1111/edt.12068

S. Sametzky, M. David, and C. Dutang, Prévention des traumatismes dentaires en pratique sportive, Real Clin, vol.3, issue.4, pp.503-509, 1992.

J. Schatz and J. Joho, A retrospective study of dento-alveolar injuries. Endod Dent Traumatol, Feb, vol.10, issue.1, pp.11-15, 1994.

B. Scheer, J. Andreasen, . Andreasen, and . Fm, Prevention of dental and oral injuries Text book and color atlas of traumatic injuries to the teeth, pp.719-754, 1994.

J. Scott, F. Burke, and D. Watts, A review of dental injuries and the use of mouthguards in contact team sports, British Dental Journal, vol.176, issue.8, pp.310-314, 1994.
DOI : 10.1038/sj.bdj.4808433

R. Seals, . Jr, R. Morrow, W. Kuebker, and W. Farney, An evaluation of mouthguard programs in Texas high school football. J Am Dent Assoc, pp.904-913, 1985.

T. Tajima and J. Shimada, Mechanical behavior of craniofacial bones under impact loading to mandible-experimental study on the ability of mouth guards to reduce impact, J Sports Dent, vol.6, pp.1-15, 2003.

T. Takeda, K. Ishigami, J. Handa, K. Naitoh, K. Kurokawa et al., Does hard insertion and space improve shock absorption ability of mouthguard?, Dental Traumatology, vol.45, issue.2, pp.77-82, 2006.
DOI : 10.1046/j.1365-2842.2002.00831.x

T. Takeda, K. Ishigami, S. Hoshina, T. Ogawa, J. Handa et al., Can mouthguards prevent mandibular bone fractures and concussions? A laboratory study with an artificial skull model, Dental Traumatology, vol.14, issue.3, 2005.
DOI : 10.1111/j.1600-4469.2004.00220.x

T. Takeda, K. Ishigami, H. Jun, K. Nakajima, A. Shimada et al., The influence of the sensor type on the measured impact absorption of mouthguard material, Dental Traumatology, vol.15, issue.4, pp.29-35, 2004.
DOI : 10.1097/00005768-200206000-00006

T. Takeda, K. Ishigami, K. Nakajima, K. Naitoh, K. Kurokawa et al., Are all mouthguards the same and safe to use? Part 2. The influence of anterior occlusion against a direct impact on maxillary incisors, Dental Traumatology, vol.13, issue.3, pp.360-365, 2008.
DOI : 10.3109/00016357909004705

T. Takeda, K. Ishigami, T. Ogawa, K. Nakajima, M. Shibusawa et al., Are all mouthguards the same and safe to use? The influence of occlusal supporting mouthguards in decreasing bone distortion and fractures, Dental Traumatology, vol.9, issue.3, pp.150-156, 2004.
DOI : 10.1034/j.1600-9657.2002.180103.x

T. Takeda, K. Ishigami, K. Shintaro, K. Nakajima, A. Shimada et al., The influence of impact object characteristics on impact force and force absorption by mouthguard material, Dental Traumatology, vol.6, issue.3, pp.12-20, 2004.
DOI : 10.1097/00005768-200206000-00006

U. Tiwari, V. Mishra, A. Bhalla, N. Singh, S. Jain et al., Fiber Bragg grating sensor for measurement of impact absorption capability of mouthguards, Dental Traumatology, vol.64, issue.4, pp.263-271, 2011.
DOI : 10.1111/j.1600-9657.2011.00998.x

D. Tran, M. Cooke, and P. Newsome, Laboratory evaluation of mouthguard material, Dental Traumatology, vol.17, issue.6, pp.260-265, 2001.
DOI : 10.1034/j.1600-9657.2001.170604.x

C. Turner, Mouth protectors, British Dental Journal, vol.143, issue.3, pp.82-86, 1977.
DOI : 10.1038/sj.bdj.4803948

S. Umiastowski, Etude du comportement à l'impact basse vitesse d'une tôle de construction navale, Thèse de Doctorat en sciences pour l'ingénieur (Mécanique)

. Saint-cyr, Université de Bretagne sud ? Ecoles Militaires de Saint-Cyr ? Coëtquidan, p.143, 2005.

L. Warnet and A. Greasley, Transient forces generated by projectiles on variable quality mouthguards monitored by instrumented impact testing, British Journal of Sports Medicine, vol.35, issue.4, pp.257-262, 2001.
DOI : 10.1136/bjsm.35.4.257

G. Watermeyer, C. Thomas, and C. Jooste, The protective potential of mouthguards, J Dent Assoc S Afr, vol.40, issue.4, pp.173-180, 1985.

B. Westerman, P. Stringfellow, and J. Eccleston, An improved mouthguard material, Australian Dental Journal, vol.88, issue.3, pp.189-91, 1997.
DOI : 10.1016/0022-3913(85)90123-4

B. Westerman, P. Stringfellow, and J. Eccleston, Beneficial effects of air inclusions on the performance of ethylene vinyl acetate (EVA) mouthguard material, British Journal of Sports Medicine, vol.36, issue.1, pp.51-53, 2002.
DOI : 10.1136/bjsm.36.1.51

B. Westerman, P. Stringfellow, and J. Eccleston, EVA mouthguards: how thick should they be? Dent Traumatol, Feb, vol.18, issue.1, pp.24-31, 2002.

B. Westerman, P. Stringfellow, and J. Eccleston, The effect on energy absorption of hard inserts in laminated EVA mouthguards, Australian Dental Journal, vol.9, issue.2, pp.21-23, 2000.
DOI : 10.1111/j.1834-7819.2000.tb00237.x

B. Westerman, P. Stringfellow, J. Eccleston, and D. Harbrow, Effect of ethylene vinyl acetate (EVA) closed cell foam on transmitted forces in mouthguard material, British Journal of Sports Medicine, vol.36, issue.3, pp.205-208, 2002.
DOI : 10.1136/bjsm.36.3.205

J. Wisniewski, K. Guskiewicz, M. Trope, and A. Sigurdsson, Incidence of cerebral concussions associated with type of mouthguard used in college football, Dental Traumatology, vol.28, issue.5, pp.143-152, 2004.
DOI : 10.1097/00042752-200303000-00005

J. Yamada, Y. Maeda, H. Satoh, and J. Miura, Anterior palatal mouthguard margin location and its effect on shock-absorbing capability, Dental Traumatology, vol.15, issue.3, pp.139-144, 2006.
DOI : 10.1034/j.1600-9657.2002.180103.x

T. Yamanaka, T. Ueno, M. Oki, H. Taniguchi, and T. Ohyama, Study on the effects of shortening the distal end of a mouthguard using modal analysis, J Med Dent Sci, vol.49, issue.4, pp.129-162, 2002.