S. Heintze and V. Rousson, Survival of zirconia-and metal-supported fixed dental prostheses: a systematic review, Int J Prosthodont, vol.23, issue.6, pp.493-502, 2010.

P. Guess, E. Bonfante, N. Silva, P. Coelho, and V. Thompson, Effect of core design and veneering technique on damage and reliability of Y-TZP-supported crowns, Dental Materials, vol.29, issue.3, pp.307-323, 2013.
DOI : 10.1016/j.dental.2012.11.012

B. Al-amleh, K. Lyons, and M. Swain, Clinical trials in zirconia: a systematic review, Journal of Oral Rehabilitation, vol.25, issue.8, pp.641-52, 2010.
DOI : 10.1111/j.1365-2842.2010.02094.x

N. Silva, V. Thompson, G. Valverde, P. Coelho, J. Powers et al., Comparative reliability analyses of zirconium oxide and lithium disilicate restorations in vitro and in vivo, The Journal of the American Dental Association, vol.142, pp.4-9, 2011.
DOI : 10.14219/jada.archive.2011.0336

P. Guess, A. Kuli?, S. Witkowski, M. Wolkewitz, Y. Zhang et al., Shear bond strengths between different zirconia cores and veneering ceramics and their susceptibility to thermocycling, Dental Materials, vol.24, issue.11, pp.1556-67, 2008.
DOI : 10.1016/j.dental.2008.03.028

G. Göstemeyer, M. Jendras, M. Dittmer, F. Bach, M. Stiesch et al., Influence of cooling rate on zirconia/veneer interfacial adhesion, Acta Biomaterialia, vol.6, issue.12, pp.4532-4540, 2010.
DOI : 10.1016/j.actbio.2010.06.026

B. Chong, A. Thangavel, S. Rolton, M. Guazzato, and I. Klineberg, Clinical and laboratory surface finishing procedures for zirconia on opposing human enamel wear: A laboratory study, Journal of the Mechanical Behavior of Biomedical Materials, vol.50, pp.93-103, 2015.
DOI : 10.1016/j.jmbbm.2015.06.007

T. Vagkopoulou, S. Koutayas, P. Koidis, and J. Strub, Zirconia in dentistry: Part 1. Discovering the nature of an upcoming bioceramic, Eur J Esthet Dent Off J Eur Acad Esthet Dent, vol.4, issue.2, pp.130-51, 2009.

J. Mecholsky, Fracture mechanics principles, Dental Materials, vol.11, issue.2, pp.111-113, 1995.
DOI : 10.1016/0109-5641(95)80044-1

Y. Zhang, J. Lee, R. Srikanth, and B. Lawn, Edge chipping and flexural resistance of monolithic ceramics, Dental Materials, vol.29, issue.12, pp.1201-1209, 2013.
DOI : 10.1016/j.dental.2013.09.004

T. Sun, S. Zhou, R. Lai, R. Liu, S. Ma et al., Load-bearing capacity and the recommended thickness of dental monolithic zirconia single crowns, Journal of the Mechanical Behavior of Biomedical Materials, vol.35, pp.93-101, 2014.
DOI : 10.1016/j.jmbbm.2014.03.014

J. Porstendörfer, A. Reineking, and H. Willert, Radiation risk estimation based on activity measurements of zirconium oxide implants, Journal of Biomedical Materials Research, vol.33, issue.4, pp.663-670, 1996.
DOI : 10.1002/(SICI)1097-4636(199612)32:4<663::AID-JBM20>3.0.CO;2-D

V. Covacci, N. Bruzzese, G. Maccauro, C. Andreassi, G. Ricci et al., In vitro evaluation of the mutagenic and carcinogenic power of high purity zirconia ceramic, Biomaterials, vol.20, issue.4, pp.371-377, 1999.
DOI : 10.1016/S0142-9612(98)00182-3

F. Bremer, S. Grade, P. Kohorst, and M. Stiesch, In vivo biofilm formation on different dental ceramics, Quintessence Int Berl Ger, vol.42, issue.7, pp.565-74, 1985.

Y. Zhang and J. Kim, Graded structures for damage resistant and aesthetic all-ceramic restorations, Dental Materials, vol.25, issue.6, pp.781-90, 2009.
DOI : 10.1016/j.dental.2009.01.002

H. Harianawala, M. Kheur, S. Apte, B. Kale, T. Sethi et al., Comparative analysis of transmittance for different types of commercially available zirconia and lithium disilicate materials, The Journal of Advanced Prosthodontics, vol.6, issue.6, pp.456-61, 2014.
DOI : 10.4047/jap.2014.6.6.456

H. Kim and S. Kim, Effect of the number of coloring liquid applications on the optical properties of monolithic zirconia, Dental Materials, vol.30, issue.9, pp.229-266, 2014.
DOI : 10.1016/j.dental.2014.04.008

N. Ilie and B. Stawarczyk, Quantification of the amount of blue light passing through monolithic zirconia with respect to thickness and polymerization conditions, The Journal of Prosthetic Dentistry, vol.113, issue.2, pp.114-135, 2015.
DOI : 10.1016/j.prosdent.2014.08.013

W. Höland, V. Rheinberger, E. Apel, C. Van-'t-hoen, M. Höland et al., Clinical applications of glass-ceramics in dentistry, Journal of Materials Science: Materials in Medicine, vol.50, issue.11, pp.1037-1079, 2006.
DOI : 10.1007/s10856-006-0441-y

S. Kang, C. J. Son, and H. , Flexural strength and microstructure of two lithium disilicate glass ceramics for CAD/CAM restoration in the dental clinic, Restorative Dentistry & Endodontics, vol.38, issue.3, pp.134-174, 2013.
DOI : 10.5395/rde.2013.38.3.134

M. Brackett, P. Lockwood, R. Messer, J. Lewis, S. Bouillaguet et al., In vitro cytotoxic response to lithium disilicate dental ceramics, Dental Materials, vol.24, issue.4, pp.450-456, 2008.
DOI : 10.1016/j.dental.2007.06.013

A. Forster, K. Ungvári, Á. Györgyey, Á. Kukovecz, K. Turzó et al., Human epithelial tissue culture study on restorative materials, Journal of Dentistry, vol.42, issue.1, pp.7-14, 2014.
DOI : 10.1016/j.jdent.2013.11.008

C. Brunot-gohin, J. Duval, E. Azogui, R. Jannetta, I. Pezron et al., Soft tissue adhesion of polished versus glazed lithium disilicate ceramic for dental applications, Dental Materials, vol.29, issue.9, pp.205-217, 2013.
DOI : 10.1016/j.dental.2013.05.004

Y. Sravanthi, Y. Ramani, A. Rathod, S. Ram, and H. Turakhia, The Comparative Evaluation of the Translucency of Crowns Fabricated with Three Different All-Ceramic Materials: An in Vitro Study, JOURNAL OF CLINICAL AND DIAGNOSTIC RESEARCH, vol.9, issue.2, pp.30-34, 2015.
DOI : 10.7860/JCDR/2015/12069.5559

L. Mair, Wear in dentistry???current terminology, Journal of Dentistry, vol.20, issue.3, pp.140-144, 1992.
DOI : 10.1016/0300-5712(92)90125-V

E. Incau and P. Saulue, Comprendre les usures dentaires. Rev Orthopédie Dento-Faciale, pp.405-427, 2011.

A. Lee, L. He, K. Lyons, and M. Swain, Tooth wear and wear investigations in dentistry, Journal of Oral Rehabilitation, vol.91, issue.3, pp.217-242, 2012.
DOI : 10.1111/j.1365-2842.2011.02257.x

A. Lee, M. Swain, L. He, and K. Lyons, Wear behavior of human enamel against lithium disilicate glass ceramic and type III gold, The Journal of Prosthetic Dentistry, vol.112, issue.6, pp.1399-405, 2014.
DOI : 10.1016/j.prosdent.2014.08.002

J. Sripetchdanond and C. Leevailoj, Wear of human enamel opposing monolithic zirconia, glass ceramic, and composite resin: An in??vitro study, The Journal of Prosthetic Dentistry, vol.112, issue.5, pp.1141-50, 2014.
DOI : 10.1016/j.prosdent.2014.05.006

M. Serra, D. Messias, and C. Turssi, Control of erosive tooth wear: possibilities and rationale, Brazilian Oral Research, vol.23, issue.1, pp.49-55, 2009.
DOI : 10.1590/S1806-83242009000500008

R. Shellis and M. Addy, The Interactions between Attrition, Abrasion and Erosion in Tooth Wear, Monogr Oral Sci, vol.25, pp.32-45, 2014.
DOI : 10.1159/000359936

S. Roy and B. Basu, Mechanical and tribological characterization of human tooth, Materials Characterization, vol.59, issue.6, pp.747-56, 2008.
DOI : 10.1016/j.matchar.2007.06.008

J. Grippo, M. Simring, and S. Schreiner, Attrition, abrasion, corrosion and abfraction revisited, The Journal of the American Dental Association, vol.135, issue.8, pp.1109-1127, 1939.
DOI : 10.14219/jada.archive.2004.0369

J. Grippo, Y. Chaiyabutr, and J. Kois, Effects of Cyclic Fatigue Stress-Biocorrosion on Noncarious Cervical Lesions, Journal of Esthetic and Restorative Dentistry, vol.55, issue.8, pp.265-72, 2013.
DOI : 10.1111/jerd.12024

L. Shamseer, D. Moher, M. Clarke, D. Ghersi, A. Liberati et al., Preferred reporting items for systematic review and meta-analysis protocols (PRISMA-P) 2015: elaboration and explanation, BMJ, vol.349, issue.jan02 1, pp.7647-7647, 2015.
DOI : 10.1136/bmj.g7647

G. Mitov, S. Heintze, S. Walz, K. Woll, F. Muecklich et al., Wear behavior of dental Y-TZP ceramic against natural enamel after different finishing procedures, Dental Materials, vol.28, issue.8, pp.909-927, 2012.
DOI : 10.1016/j.dental.2012.04.010

M. Kim, S. Oh, J. Kim, S. Ju, D. Seo et al., Wear evaluation of the human enamel opposing different Y-TZP dental ceramics and other porcelains, Journal of Dentistry, vol.40, issue.11, pp.979-88, 2012.
DOI : 10.1016/j.jdent.2012.08.004

S. Janyavula, N. Lawson, D. Cakir, P. Beck, L. Ramp et al., The wear of polished and glazed zirconia against enamel, The Journal of Prosthetic Dentistry, vol.109, issue.1, pp.22-31, 2013.
DOI : 10.1016/S0022-3913(13)60005-0

B. Stawarczyk, M. Özcan, F. Schmutz, A. Trottmann, M. Roos et al., Two-body wear of monolithic, veneered and glazed zirconia and their corresponding enamel antagonists, Acta Odontologica Scandinavica, vol.82, issue.1, pp.102-114, 2013.
DOI : 10.4028/www.scientific.net/KEM.153-154.1

W. Mörmann, B. Stawarczyk, A. Ender, B. Sener, T. Attin et al., Wear characteristics of current aesthetic dental restorative CAD/CAM materials: Two-body wear, gloss retention, roughness and Martens hardness, Journal of the Mechanical Behavior of Biomedical Materials, vol.20, pp.113-138, 2013.
DOI : 10.1016/j.jmbbm.2013.01.003

J. Park, S. Park, K. Lee, K. Yun, and H. Lim, Antagonist wear of three CAD/CAM anatomic contour zirconia ceramics, The Journal of Prosthetic Dentistry, vol.111, issue.1, pp.20-29, 2014.
DOI : 10.1016/j.prosdent.2013.06.002

R. Amer, D. Kürklü, E. Kateeb, and R. Seghi, Three-body wear potential of dental yttrium-stabilized zirconia ceramic after grinding, polishing, and glazing treatments, The Journal of Prosthetic Dentistry, vol.112, issue.5, pp.1151-1156, 2014.
DOI : 10.1016/j.prosdent.2013.12.021

N. Lawson, S. Janyavula, S. Syklawer, E. Mclaren, and J. Burgess, Wear of enamel opposing zirconia and lithium disilicate after adjustment, polishing and glazing, Journal of Dentistry, vol.42, issue.12, pp.1586-91, 2014.
DOI : 10.1016/j.jdent.2014.09.008

C. Figueiredo-pina, N. Patas, J. Canhoto, R. Cláudio, S. Olhero et al., Tribological behaviour of unveneered and veneered lithium disilicate dental material, Journal of the Mechanical Behavior of Biomedical Materials, vol.53, pp.226-264, 2015.
DOI : 10.1016/j.jmbbm.2015.08.007

B. Stawarczyk, A. Liebermann, M. Eichberger, and J. Güth, Evaluation of mechanical and optical behavior of current esthetic dental restorative CAD/CAM composites, Journal of the Mechanical Behavior of Biomedical Materials, vol.55, pp.1-11, 2015.
DOI : 10.1016/j.jmbbm.2015.10.004

R. Zandparsa, E. Huni, R. Hirayama, H. Johnson, and M. , Effect of different dental ceramic systems on the wear of human enamel: An in??vitro study, The Journal of Prosthetic Dentistry, vol.115, issue.2, 2015.
DOI : 10.1016/j.prosdent.2015.09.005

J. Esquivel-upshaw, H. Young, J. Jones, M. Yang, and K. Anusavice, In vivo wear of enamel by a lithia disilicate-based core ceramic used for posterior fixed partial dentures: first-year results, Int J Prosthodont, vol.19, issue.4, pp.391-397, 2006.

T. Stober, J. Bermejo, P. Rammelsberg, and M. Schmitter, Enamel wear caused by monolithic zirconia crowns after 6??months of clinical use, Journal of Oral Rehabilitation, vol.17, issue.Suppl 1, pp.314-336, 2014.
DOI : 10.1111/joor.12139

K. Mundhe, V. Jain, G. Pruthi, and N. Shah, Clinical study to evaluate the wear of natural enamel antagonist to zirconia and metal ceramic crowns, The Journal of Prosthetic Dentistry, vol.114, issue.3, 2015.
DOI : 10.1016/j.prosdent.2015.03.001

P. Lambrechts, M. Braem, M. Vuylsteke-wauters, and G. Vanherle, Quantitative in vivo Wear of Human Enamel, Journal of Dental Research, vol.68, issue.12, pp.1752-1756, 1989.
DOI : 10.1177/00220345890680120601

V. Preis, M. Behr, C. Kolbeck, S. Hahnel, G. Handel et al., Wear performance of substructure ceramics and veneering porcelains, Dental Materials, vol.27, issue.8, pp.796-804, 2011.
DOI : 10.1016/j.dental.2011.04.001

L. Wang, Y. Liu, W. Si, H. Feng, Y. Tao et al., Friction and wear behaviors of dental ceramics against natural tooth enamel, Journal of the European Ceramic Society, vol.32, issue.11, pp.2599-606, 2012.
DOI : 10.1016/j.jeurceramsoc.2012.03.021

M. Rosentritt, V. Preis, M. Behr, S. Hahnel, G. Handel et al., Two-body wear of dental porcelain and substructure oxide ceramics, Clinical Oral Investigations, vol.21, issue.3, pp.935-978, 2012.
DOI : 10.1007/s00784-011-0589-9

F. Beuer, M. Stimmelmayr, J. Gueth, D. Edelhoff, and M. Naumann, In vitro performance of full-contour zirconia single crowns, Dental Materials, vol.28, issue.4, pp.449-56, 2012.
DOI : 10.1016/j.dental.2011.11.024

V. Preis, M. Behr, G. Handel, S. Schneider-feyrer, S. Hahnel et al., Wear performance of dental ceramics after grinding and polishing treatments, Journal of the Mechanical Behavior of Biomedical Materials, vol.10, pp.13-22, 2012.
DOI : 10.1016/j.jmbbm.2012.03.002

T. Miyazaki, T. Nakamura, H. Matsumura, S. Ban, and T. Kobayashi, Current status of zirconia restoration, Journal of Prosthodontic Research, vol.57, issue.4, pp.236-61, 2013.
DOI : 10.1016/j.jpor.2013.09.001

R. Amer, D. Kürklü, and W. Johnston, Effect of simulated mastication on the surface roughness of three ceramic systems, The Journal of Prosthetic Dentistry, vol.114, issue.2, 2015.
DOI : 10.1016/j.prosdent.2015.02.018

V. Preis, K. Grumser, S. Schneider-feyrer, M. Behr, and M. Rosentritt, Cycle-dependent in vitro wear performance of dental ceramics after clinical surface treatments, Journal of the Mechanical Behavior of Biomedical Materials, vol.53, pp.49-58, 2015.
DOI : 10.1016/j.jmbbm.2015.08.009

P. Cardelli, F. Manobianco, N. Serafini, G. Murmura, and F. Beuer, Full-Arch, Implant-Supported Monolithic Zirconia Rehabilitations, J Prosthodont Off J Am Coll Prosthodont, vol.112, 2015.
DOI : 10.1002/9781119274605.ch33

M. Pintado, G. Anderson, R. Delong, and W. Douglas, Variation in tooth wear in young adults over a two-year period, The Journal of Prosthetic Dentistry, vol.77, issue.3, pp.313-333, 1997.
DOI : 10.1016/S0022-3913(97)70189-6

H. Schindler, E. Stengel, and W. Spiess, Feedback control during mastication of solid food textures???a clinical-experimental study, The Journal of Prosthetic Dentistry, vol.80, issue.3, pp.330-336, 1998.
DOI : 10.1016/S0022-3913(98)70134-9

S. Heintze, How to qualify and validate wear simulation devices and methods, Dental Materials, vol.22, issue.8, pp.712-746, 2006.
DOI : 10.1016/j.dental.2006.02.002

J. Condon and J. Ferracane, Evaluation of composite wear with a new multi-mode oral wear simulator, Dental Materials, vol.12, issue.4, pp.218-244, 1996.
DOI : 10.1016/S0109-5641(96)80026-1

S. Heintze, M. Faouzi, V. Rousson, and M. Özcan, Correlation of wear in vivo and six laboratory wear methods, Dental Materials, vol.28, issue.9, pp.961-73, 2012.
DOI : 10.1016/j.dental.2012.04.006

V. Preis, M. Schmalzbauer, D. Bougeard, S. Schneider-feyrer, and M. Rosentritt, Surface properties of monolithic zirconia after dental adjustment treatments and in vitro wear simulation, Journal of Dentistry, vol.43, issue.1, pp.133-142, 2015.
DOI : 10.1016/j.jdent.2014.08.011

A. Shortall, X. Hu, and P. Marquis, Potential countersample materials for in vitro simulation wear testing, Dental Materials, vol.18, issue.3, pp.246-54, 2002.
DOI : 10.1016/S0109-5641(01)00043-4

S. Heintze, A. Cavalleri, M. Forjanic, G. Zellweger, and V. Rousson, Wear of ceramic and antagonist???A systematic evaluation of influencing factors in vitro, Dental Materials, vol.24, issue.4, pp.433-482, 2008.
DOI : 10.1016/j.dental.2007.06.016

S. Passos, Y. Torrealba, P. Major, B. Linke, C. Flores-mir et al., In Vitro Wear Behavior of Zirconia Opposing Enamel: A Systematic Review, Journal of Prosthodontics, vol.15, issue.Suppl 2, pp.593-601, 2014.
DOI : 10.1111/jopr.12167

E. Tzanakakis, I. Tzoutzas, and P. Koidis, Is there a potential for durable adhesion to zirconia restorations? A systematic review, The Journal of Prosthetic Dentistry, vol.115, issue.1, pp.9-19, 2016.
DOI : 10.1016/j.prosdent.2015.09.008