Structure-property relationships in dimethacrylate networks based on, Dental Materials, vol.25, issue.9, 2009. ,
DOI : 10.1016/j.dental.2009.01.106
Dental restorations for oral rehabilitation ??? testing of laboratory properties versus clinical performance for clinical decision making, Journal of Oral Rehabilitation, vol.78, issue.12, p.12, 2007. ,
DOI : 10.1177/00220345990780080201
« Dynamic mechanical analysis of high pressure polymerized urethane dimethacrylate ». Dental materials 30, 2014. ,
Rodrigues Filho. « Relationship between fracture toughness and flexural strength in dental porcelains », Journal of biomedical materials research. Part B, Applied biomaterials, vol.78, issue.2, 2006. ,
A 2-year Retrospective Clinical study of Enamic Crowns Performed in a Private Practice Setting, Journal of Esthetic and Restorative Dentistry, vol.23, issue.Spec Iss A, 2016. ,
DOI : 10.1111/jopr.12124
Damage tolerance of indirect restorative materials (including PICN) after simulated bur adjustments, Dental Materials, vol.31, issue.6, 2015. ,
DOI : 10.1016/j.dental.2015.03.007
Hertzian contact response and damage tolerance of dental ceramics, Journal of the Mechanical Behavior of Biomedical Materials, vol.34, 2014. ,
DOI : 10.1016/j.jmbbm.2014.02.002
« Current ceramic materials and systems with clinical recommendations : a systematic review ». The journal of prosthetic dentistry 98, pp.10-1016, 2007. ,
DOI : 10.1016/s0022-3913(07)60124-3
« Characterization of a polymer-infiltrated ceramicnetwork material ». Dental materials 30, 2014. ,
Emerging Ceramic-based Materials for Dentistry, Journal of Dental Research, vol.43, issue.12, pp.1210-1177, 2014. ,
DOI : 10.1016/S0020-7403(01)00016-9
URL : http://www.ncbi.nlm.nih.gov/pmc/articles/PMC4237640
« Clinical performance of a new biomimetic double network material ». The open dentistry journal 7, pp.10-2174, 2013. ,
« Le temps des pionniers ». L'information dentaire 89, pp.29-1659, 2007. ,
« Microtensile bond strength testing of luting cements to prefabricated CAD/CAM ceramic and composite blocks ». Dental materials 19, pp.575-83, 2003. ,
Bond strength of novel CAD/CAM restorative materials to self-adhesive resin cement: the effect of surface treatments ». The journal of adhesive dentistry 16, 2014. ,
« developing a more complete understanding of stresses produced in dental composites during polymerization ». Dental materials 21, 2005. ,
R-Curve Behavior of Dental Ceramic Materials, Journal of Dental Research, vol.81, issue.8, pp.10-1177, 2002. ,
DOI : 10.1111/j.1151-2916.1988.tb05078.x
Clinical efficacy of composite versus ceramic inlays and onlays: A systematic review, Dental materials 29, p.12, 2013. ,
DOI : 10.1016/j.dental.2013.09.009
« Are you sure it's not ceramics ?, 2015. ,
Method for fabricating ceramic network material. US6159417 A, filed 30 novembre 1998, 2000. ,
« Biocompatibility of polymer-infiltrated-ceramic-network (picn) materials with human gingival fibroblasts (hgfs) ». Dental materials 32, 2016. ,
Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part I. Pressable and alumina glass-infiltrated ceramics, Dental Materials, vol.20, issue.5, 2004. ,
DOI : 10.1016/j.dental.2003.05.003
« Comparison of the deformation and failure characteristics of morphologically distinct metal-glass interpenetrating phase composites », Journal of materials science, vol.37, pp.13-2801, 2002. ,
« A novel polymer infiltrated ceramic dental material ». Dental materials 27, 2011. ,
DOI : 10.1016/j.dental.2011.02.002
Fatigue resistance of denture teeth, Journal of the Mechanical Behavior of Biomedical Materials, vol.53, 2016. ,
DOI : 10.1016/j.jmbbm.2015.08.034
Static and fatigue mechanical behavior of three dental CAD/CAM ceramics, Journal of the Mechanical Behavior of Biomedical Materials, vol.59, 2016. ,
DOI : 10.1016/j.jmbbm.2016.01.023
« Development of a clinically validated bulk failure test for ceramic crowns ». The Journal of prosthetic dentistry 104, pp.228-266, 2010. ,
A review of adaptive mechanisms in cell responses towards oxidative stress caused by dental resin monomers, Biomaterials, vol.34, issue.19 ,
DOI : 10.1016/j.biomaterials.2013.03.019
Mechanical properties of composite resin blocks for CAD/CAM, Dental Materials Journal, vol.33, issue.5, pp.705-715, 2014. ,
DOI : 10.4012/dmj.2014-208
« Influence of CAD/CAM tool and material on tool wear and roughness of dental prostheses after milling ». The journal of prosthetic dentistry 114, pp.236-247, 2015. ,
« Comparison of mechanical properties of three machinable ceramics with an experimental fluorophlogopite glass ceramic ». The journal of prosthetic dentistry 114, 2015. ,
Ceramic dental biomaterials and CAD/CAM technology: State of the art, Journal of Prosthodontic Research, vol.58, issue.4, 2014. ,
DOI : 10.1016/j.jpor.2014.07.003
Composite Resins and bonded porcelain: the postamalgam era ?, Journal of the California dental association, vol.34, issue.2, pp.135-182, 2006. ,
From Artisanal to CAD-CAM Blocks, Journal of Dental Research, vol.8, issue.1, pp.487-95, 2016. ,
DOI : 10.4103/1305-7456.126240
Current concepts on the management of tooth wear: part 1. Assessment, treatment planning and strategies for the prevention and the passive management of tooth wear, BDJ, vol.1, issue.1, 2012. ,
DOI : 10.1016/j.jdent.2010.09.007
A review of dental CAD/CAM: current status and future perspectives from 20 years of experience, Dental Materials Journal, vol.28, issue.1, pp.44-56, 2009. ,
DOI : 10.4012/dmj.28.44
Wear characteristics of current aesthetic dental restorative CAD/CAM materials: Two-body wear, gloss retention, roughness and Martens hardness, Journal of the Mechanical Behavior of Biomedical Materials, vol.20, 2013. ,
DOI : 10.1016/j.jmbbm.2013.01.003
« Properties of experimental urethane dimethacrylate-based dental resin composite blocks obtained via thermopolymerization under high pressure ». Dental materials 29, 2013. ,
Anusavice. « Factors affecting enamel and ceramic wear: a literature review ». The journal of prosthetic dentistry 87, pp.451-59, 2002. ,
« Fabrication and characterization of biomimetic ceramic/polymer composite materials for dental restoration ». Dental materials 29, 2013. ,
« Optimum pressure for the high-pressure polymerization of urethane dimethacrylate ». Dental materials 31, 2015. ,
« High-temperature high-pressure polymerized urethane dimethacrylate-mechanical properties and monomer release ». Dental materials 30, 2014. ,
DOI : 10.1016/j.dental.2013.12.009
A micro-mechanics model of dentin mechanical properties, Biomaterials, vol.25, issue.20, p.20, 2004. ,
DOI : 10.1016/j.biomaterials.2003.12.042
Engineering long term clinical success of advanced ceramic prostheses, Journal of materials science : Materials in medicine 18, 2007. ,
DOI : 10.4012/dmj.13.214
« What constitutes an ideal dental restorative material ? » Advances in dental research 25, pp.10-1177, 2013. ,
DOI : 10.1177/0022034513502206
Resin-composite Blocks for Dental CAD/CAM Applications, Journal of Dental Research, vol.28, issue.12, pp.1210-1177, 2014. ,
DOI : 10.1016/j.dental.2011.10.014
URL : http://www.ncbi.nlm.nih.gov/pmc/articles/PMC4462808
Composite ceramic block ,
« Captek TM : a new capillary casting technology for ceramometal restorations, Quintessence of dental technology, pp.9-20, 1995. ,
Effect of chemical structure on degree of conversion in light-cured dimethacrylate-based dental resins, Biomaterials, vol.23, issue.8, pp.1819-1848, 2002. ,
DOI : 10.1016/S0142-9612(01)00308-8
Evaluation of mechanical and optical behavior of current esthetic dental restorative CAD/CAM composites, Journal of the Mechanical Behavior of Biomedical Materials, vol.55 ,
DOI : 10.1016/j.jmbbm.2015.10.004
Influence of pressure-assisted polymerization on the microstructure and strength of polymer-infiltrated ceramics, Journal of Materials Science, vol.73, issue.2, pp.3239-3286, 2013. ,
DOI : 10.1007/BF00723480
« Interpenetrating network ceramic-resin composite dental restorative materials ». Dental materials 32, 2016. ,
DOI : 10.1016/j.dental.2015.09.009
Effects of High-Temperature-Pressure Polymerized Resin-Infiltrated Ceramic Networks on Oral Stem Cells, PLOS ONE, vol.31, issue.5, 2016. ,
DOI : 10.1371/journal.pone.0155450.s001
URL : https://hal.archives-ouvertes.fr/hal-01334110
Microstructure and mechanical properties of Al2O3/Cu?O composites fabricated by pressureless infiltration technique ». Materials science and engineering : A 244, pp.154-60, 1998. ,
Effect of Ultraviolet Aging on Translucency of Resin-Cemented Ceramic Veneers: An In Vitro Study, Journal of Prosthodontics, vol.88, issue.1, 2014. ,
DOI : 10.1067/mpr.2002.129803
« Retrospective survival analysis of 110 lithium disilicate crowns with feather-edge marginal preparation ». The international journal of esthetic dentistry 10, pp.246-57, 2015. ,
The future of dental devices is digital ». Dental materials 28, 2012. ,
Principles of biocompatibility for dental practitioners ». The journal of prosthetic dentistry 86, 2001. ,