A. Abdelkarim, M. Noujeim, T. Sarkis, R. Lee, P. Mah et al., Effect of movement on highresolution cone-beam computed tomography images. Oral Surg Oral Med Oral Pathol Oral Radiol Endod, vol.103, p.48, 2007.

H. Antoun, Les greffes de sinus en implantologie, 2011.

H. Antoun, J. M. Sitbon, H. Martinez, and P. Missika, A prospective randomized study comparing two techniques of bone augmentation: onlay graft alone or associated with a membrane, Clin Oral Implants Res, 2001.

T. Von-arx and D. Buser, Horizontal ridge augmentation using autogenous block grafts and the guided bone regeneration technique with collagen membranes: a clinical study with 42 patients, Clin Oral Implants Res, vol.17, issue.4, pp.359-66, 2006.

N. Bellaiche and J. Méningaud, Guide pratique du cone beam en imagerie dento-maxillaire. Malakoff: Éditions CdP, 2016.

. Biobank, Innovation BIObank : le greffon osseux sur mesure, 2015.

D. Sur,

G. Boris, A. Sammut, Y. Charbit, P. Mahler, and J. Surmenian, Les allogreffes en bloc en chirurgie osseuse pré-implantaire : revue de la littérature et série de cas cliniques, vol.4, p.13, 2014.

D. Buser, K. Dula, H. P. Hirt, and R. K. Schenk, Lateral ridge augmentation using autografts and barrier membranes: a clinical study with 40 partially edentulous patients, J Oral Maxillofac Surg, vol.54, issue.4, p.33, 1996.

F. Carinci, G. Brunelli, M. Franco, A. Viscioni, L. Rigo et al., Retrospective Study on, p.287

, Implants Installed in Resorbed Maxillae Grafted with Fresh Frozen Allogenous Bone: Implant Installed in Grafted Maxillae, Clin Implant Dent Relat Res, vol.12, issue.2, pp.91-99, 2008.

J. Carrel, A. Wiskott, M. Moussa, P. Rieder, S. Scherrer et al., A 3D printed TCP/HA structure as a new osteoconductive scaffold for vertical bone augmentation, Clin Oral Implants Res, vol.27, issue.1, pp.55-62, 2016.

F. Chai, G. Raoul, A. Wiss, J. Ferri, and H. F. Hildebrand, Bone substitutes: Classification and concerns, Rev Stomatol Chir Maxillofac, vol.112, issue.4, pp.212-233, 2011.

M. Chanavaz, Anatomy and histophysiology of the periosteum: quantification of the periosteal blood supply to the adjacent bone with 85Sr and gamma spectrometry, J Oral Implantol, vol.21, issue.3, pp.214-223, 1995.

B. S. Chang, C. K. Lee, K. S. Hong, H. J. Youn, H. S. Ryu et al., Osteoconduction at porous hydroxyapatite with various pore configurations, Biomaterials, vol.21, issue.12, pp.1291-1299, 2000.

G. Chaushu, O. Mardinger, M. Peleg, O. Ghelfan, and J. Nissan, Analysis of complications following augmentation with cancellous block allografts, J Periodontol, vol.81, issue.12, pp.1759-64, 2010.

G. Chaushu, M. Vered, O. Mardinger, and J. Nissan, Histomorphometric analysis after maxillary sinus floor augmentation using cancellous bone-block allograft, J Periodontol, vol.81, issue.8, pp.1147-52, 2010.

E. Chiarello, M. Cadossi, G. Tedesco, P. Capra, C. Calamelli et al., Autograft, allograft and bone substitutes in reconstructive orthopedic surgery, Aging Clin Exp Res, vol.25, issue.S1, p.3, 2013.

M. Colombier, P. Lesclous, and J. Tulasne, Bone graft healing, Rev Stomatol Chir Maxillofac, vol.106, issue.3, p.65, 2005.

M. Colombier, P. Lesclous, and J. Tulasne, La cicatrisation des greffes osseuses, Rev Stomatol Chir Maxillofac, vol.106, issue.3, p.65, 2005.

O. Cornu, X. Banse, P. L. Docquier, S. Luyckx, and C. Delloye, Effect of freeze-drying and gamma irradiation on the mechanical properties of human cancellous bone, J Orthop Res, vol.18, issue.3, p.31, 2000.

C. Dahlin and A. Johansson, Iliac crest autogenous bone graft versus alloplastic graft and guided bone regeneration in the reconstruction of atrophic maxillae: a 5-year retrospective study on cost-effectiveness and clinical outcome, Clin Implant Dent Relat Res, vol.13, issue.4, pp.305-315, 2011.

M. Davaparnah, S. Szmukler, P. Khoury, and B. Jakubowicz, Manuel d'implantologie Clinique, concepts, protocoles et innovations récentes, CdP, 2008.

D. Fabbro, M. Testori, T. Francetti, L. Weinstein, and R. , Systematic review of survival rates for implants placed in the grafted maxillary sinus, Int J Periodontics Restorative Dent, vol.24, issue.6, pp.565-77, 2004.

R. R. Dias, F. P. Sehn, T. De-santana-santos, E. R. Silva, G. Chaushu et al., Corticocancellous fresh-frozen allograft bone blocks for augmenting atrophied posterior mandibles in humans, Clin Oral Implants Res, vol.27, issue.1, pp.39-46, 2016.

A. L. Dumitrescu, Bone Grafts and Bone Graft Substitutes in Periodontal Therapy, Chemicals in Surgical Periodontal Therapy

H. Berlin, , pp.73-144, 2011.

S. Durual, Impression 3D et régénération osseuse, un mariage plein d'avenir, Biologie et Biomatériaux, 2016.

J. Fages, A. Marty, C. Delga, J. S. Condoret, D. Combes et al., Use of supercritical CO2 for bone delipidation, Biomaterials, 1994.

S. J. Froum, S. S. Wallace, N. Elian, S. C. Cho, and D. P. Tarnow, Comparison of mineralized cancellous bone allograft (Puros) and anorganic bovine bone matrix (Bio-Oss) for sinus augmentation: histomorphometry at 26 to 32 weeks after grafting, Int J Periodontics Restorative Dent, vol.26, issue.6, p.51, 2006.

R. Gapski, R. Neiva, T. Oh, and H. Wang, Histologic analyses of human mineralized bone grafting material in sinus elevation procedures: a case series, Int J Periodontics Restorative Dent, vol.26, issue.1, pp.59-69, 2006.

U. Garagiola, R. Grigolato, R. Soldo, M. Bacchini, G. Bassi et al., Computer-aided design/computer-aided manufacturing of hydroxyapatite scaffolds for bone reconstruction in jawbone atrophy: a systematic review and case report, Maxillofacial Plastic and Reconstructive Surgery

, Disponible sur, vol.38, 2016.

A. K. Garg, Bone biology, harvesting, grafting for dental implants: rationale and clinical applications, 2004.

P. Georges, D. Nisand, E. D. Mora, and F. , Efficacy of the supraperiosteal envelope technique: a preliminary comparative clinical study, Int J Periodontics Restorative Dent, vol.29, issue.2, p.11, 2009.

J. S. Gross, Bone grafting materials for dental applications: a practical guide, Compend Contin Educ Dent, vol.18, issue.10, 1024.

D. Harris, Advanced surgical procedures: bone augmentation, Dent Update, vol.24, issue.8, pp.332-339, 1997.

D. Holtzclaw, N. Toscano, L. Eisenlohr, and D. Callan, The safety of bone allografts used in dentistry: a review, J Am Dent Assoc, vol.139, issue.9, pp.1192-1201, 2008.

P. Holzmann, E. Niculescu-morzsa, H. Zwickl, F. Halbwirth, M. Pichler et al., Investigation of bone allografts representing different steps of the bone bank procedure using the CAM-model, ALTEX, vol.27, issue.2, pp.97-103, 2010.

K. Horner, M. Islam, L. Flygare, K. Tsiklakis, and E. Whaites, Basic principles for use of dental cone beam computed tomography: consensus guidelines of the European Academy of Dental and Maxillofacial Radiology, Dentomaxillofac Radiol, vol.38, issue.4, pp.187-95, 2009.

M. Jabbour and B. Tourbah, Le bloc osseux allogénique Puros : propriété et technique d'utilisation. Implant, vol.14, p.34, 2011.

M. Jacotti, Simplified onlay grafting with a 3-dimensional block technique: a technical note, Int J Oral Maxillofac Implants, vol.21, issue.4, pp.635-644, 2006.

M. Jacotti, C. Barausse, and F. P. , Posterior Atrophic Mandible Rehabilitation With Onlay Allograft Created With CAD-CAM Procedure: A Case Report, Implant Dentistry, vol.23, issue.1, pp.22-30, 2014.

S. S. Jensen, N. Broggini, E. Hjørting-hansen, R. Schenk, and D. Buser, Bone healing and graft resorption of autograft, anorganic bovine bone and beta-tricalcium phosphate. A histologic and histomorphometric study in the mandibles of minipigs, Clin Oral Implants Res, vol.17, issue.3, p.43, 2006.

S. S. Jensen, A. Yeo, M. Dard, E. Hunziker, R. Schenk et al., Evaluation of a novel biphasic calcium phosphate in standardized bone defects: a histologic and histomorphometric study in the mandibles of minipigs, Clin Oral Implants Res, 2007.

J. D. Keith, Localized ridge augmentation with a block allograft followed by secondary implant placement: a case report, Int J Periodontics Restorative Dent, vol.24, issue.1, pp.11-18, 2004.

J. D. Keith, P. Petrungaro, J. A. Leonetti, C. W. Elwell, K. J. Zeren et al., Clinical and histologic evaluation of a mineralized block allograft: results from the developmental period, Int J Periodontics Restorative Dent, 2001.

J. Kent, J. Quinn, M. Zide, I. Finger, M. Jarcho et al., Correction of alveolar ridge deficencies with nonresorbable hydroxyapatite, The journal of the American Dental Association. Elsevier, vol.993, p.1001, 1982.

E. Kfir, V. Kfir, E. Eliav, and E. Kaluski, Minimally invasive guided bone regeneration, J Oral Implantol, vol.33, issue.4, pp.205-215, 2007.

E. Khoury, N. Faby, and G. Khoury, L'abord par tunnellisation dans les augmentations osseuses, Le Fil Dentaire, issue.64, pp.30-36, 2011.

F. Khoury, P. Keller, and D. P. Tarnow, Greffe osseuse en implantologie. Paris; Berlin; Chicago, 2010.

G. Khoury, Les matériaux allogéniques de substitution osseuse, Implantologie. Juillet, vol.11, issue.5, 2008.

J. Kim, B. Choi, J. Li, X. F. Jeong, and S. , Blood vessels of the peri-implant mucosa: a comparison between flap and flapless procedures. Oral Surg Oral Med Oral Pathol Oral Radiol Endod, vol.107, p.12, 2009.

C. Knabe, C. Koch, A. Rack, and M. Stiller, Effect of beta-tricalcium phosphate particles with varying porosity on osteogenesis after sinus floor augmentation in humans, Biomaterials, vol.29, issue.14, pp.2249-58, 2008.

A. Laviv, O. T. Jensen, E. Tarazi, and N. Casap, Alveolar sandwich osteotomy in resorbed alveolar ridge for dental implants: a 4-year prospective study, J Oral Maxillofac Surg, vol.72, issue.2, p.303, 2014.

L. Huec, J. C. Schaeverbeke, T. Clement, D. Faber, J. et al., Influence of porosity on the mechanical resistance of hydroxyapatite ceramics under compressive stress, Biomaterials, vol.16, issue.2, pp.113-121, 1995.

R. Lomas, A. Chandrasekar, and T. N. Board, Bone allograft in the U.K.: perceptions and realities, Hip Int, vol.23, issue.5, p.33, 2013.

C. Maiorana, M. Beretta, S. Salina, and F. Santoro, Reduction of autogenous bone graft resorption by means of bio-oss coverage: a prospective study, Int J Periodontics Restorative Dent, vol.25, issue.1, pp.19-25, 2005.

M. A. Matsumoto, H. N. Filho, E. Francischone-arlos, and A. Consolaro, Microscopic analysis of reconstructed maxillary alveolar ridges using autogenous bone grafts from the chin and iliac crest, Int J Oral Maxillofac Implants, vol.17, issue.4, pp.507-523, 2002.

B. S. Mcallister and K. Haghighat, Bone augmentation techniques, J Periodontol, vol.78, issue.3, pp.377-96, 2007.

C. E. Misch and F. Dietsh, Bone-grafting materials in implant dentistry, Implant Dent, vol.2, issue.3, pp.158-67, 1993.

D. Mitton, J. Rappeneau, and R. Bardonnet, Effect of a supercritical CO2 based treatment on mechanical properties of human cancellous bone, Eur J Orthop Surg Traumatol, vol.15, issue.4, p.9, 2005.

M. Moret, M. Canonica, E. Henriot, T. Piral, and G. Princ, Greffons osseux d'apposition allogéniques BioBank « modélisés » 3D, Information Dentaire, vol.2, issue.8, 2016.

M. Moussa, J. Carrel, S. Scherrer, M. Cattani-lorente, A. Wiskott et al., Medium-Term Function of a 3D Printed TCP/HA Structure as a New Osteoconductive Scaffold for Vertical Bone Augmentation: A Simulation by BMP-2 Activation, Materials, vol.8, issue.5, pp.2174-90, 2015.

J. Nissan, O. Ghelfan, O. Mardinger, S. Calderon, and G. Chaushu, Efficacy of cancellous block allograft augmentation prior to implant placement in the posterior atrophic mandible, Clin Implant Dent Relat Res, vol.13, issue.4, pp.279-85, 2011.

J. Nissan, V. Marilena, O. Gross, O. Mardinger, and G. Chaushu, Histomorphometric analysis following augmentation of the anterior atrophic maxilla with cancellous bone block allograft, Int J Oral Maxillofac Implants, vol.27, issue.1, p.9, 2012.

S. S. Noumbissi, J. L. Lozada, P. J. Boyne, M. D. Rohrer, D. Clem et al., Clinical, histologic, and histomorphometric evaluation of mineralized solvent-dehydrated bone allograf (Puros) in human maxillary sinus grafts, J Oral Implantol, 2005.

H. Oonishi, S. Kushitani, E. Yasukawa, H. Iwaki, L. L. Hench et al., Particulate bioglass compared with hydroxyapatite as a bone graft substitute, Clin Orthop Relat Res, vol.334, pp.316-341, 1997.

E. Pereira, A. Messias, R. Dias, J. F. Salvoni, A. Guerra et al., Horizontal Resorption of Fresh-Frozen Corticocancellous Bone Blocks in the Reconstruction of the Atrophic Maxilla at 5 Months, Clin Implant Dent Relat Res, vol.17, issue.2, pp.444-58, 2015.

P. S. Petrungaro and S. Amar, Localized ridge augmentation with allogenic block grafts prior to implant placement: case reports and histologic evaluations, Implant Dent, vol.14, issue.2, pp.139-187, 2005.

G. Princ, T. Piral, and A. Benhamou, Chirurgie osseuse préimplantaire

L. Sbordone, P. Toti, G. B. Menchini-fabris, C. Sbordone, P. Piombino et al., Volume changes of autogenous bone grafts after alveolar ridge augmentation of atrophic maxillae and mandibles, Int J Oral Maxillofac Surg, vol.38, issue.10, pp.1059-65, 2009.

M. Schlee and Y. Buchâckert, Augmentation with customized milled bone graft, Digital dental news, vol.8, 2013.

M. Schlee and D. Rothamel, Ridge Augmentation Using Customized Allogenic Bone Blocks: Proof of Concept and Histological Findings, Implant Dentistry, vol.22, issue.3, pp.212-220, 2013.

A. Seban, Greffes osseuses et implants

. Issy-les-moulineaux, , 2008.

A. Seban and P. Bonnaud, Pratique clinique des greffes osseuses et implants modalités thérapeutiques et prise en charge des complications

. Issy-les-moulineaux, , 2012.

D. Sur,

C. Senechaut, Greffon osseux allogénique « sur mesure » et comblement de sinus, 2016.

R. Spin-neto, A. Stavropoulos, F. L. Coletti, R. S. Faeda, L. Pereira et al., Graft incorporation and implant osseointegration following the use of autologous and fresh-frozen allogeneic block bone grafts for lateral ridge augmentation, Clin Oral Implants Res, vol.25, issue.2, p.33, 2014.

T. Thomas, A. Martin, and M. Lafage-proust, , 2008.

L. Venet, M. Perriat, P. Jaby, and T. Fortin, Intérêt de l'imagerie pour les greffes d'apposition allogéniques par tunnelisation, Information Dentaire, vol.18, issue.14, p.24, 2015.

J. Waasdorp and M. A. Reynolds, Allogeneic bone onlay grafts for alveolar ridge augmentation: a systematic review, Int J Oral Maxillofac Implants, vol.25, issue.3, p.31, 2010.

N. U. Zitzmann, R. Naef, and P. Schärer, Resorbable versus nonresorbable membranes in combination with BioOss for guided bone regeneration, Int J Oral Maxillofac Implants, vol.12, issue.6, p.52, 1997.