®. 3m, . Lava, and . Ultimate, , 2011.

D. Sur,

O. Addison, P. M. Marquis, and G. Fleming, The impact of hydrofluoric acid surface treatments on the performance of a porcelain laminate restorative material. Dent Mater Off Publ Acad Dent Mater, vol.23, pp.461-469, 2007.

A. Albero, A. Pascual, I. Camps, and M. Grau-benitez, Comparative characterization of a novel cad-cam polymer-infiltrated-ceramic-network, J Clin Exp Dent, vol.7, issue.4, pp.495-500, 2015.

A. G. , Universal adhesives : the next evolution in adhesive dentistry?, Compend Contin Educ Dent, vol.36, issue.1, pp.15-26, 2015.

A. Awada and D. Nathanson, Mechanical properties of resin-ceramic CAD/CAM restorative materials, J Prosthet Dent, vol.114, issue.4, pp.587-93, 2015.

C. Azevedo and P. Colon, Les polymères de collage, Réal Clin, vol.16, issue.4, pp.351-64, 2005.

N. Barghi, To silanate or not to silanate : making a clinical decision, Compend Contin Educ Dent, vol.21, issue.8, pp.659-62, 2000.

M. Bartala, F. Duret, and . La, , 2014.

K. Barutcigil, Ç. Barutcigil, E. Kul, M. M. Özarslan, and U. S. Buyukkaplan, Effect of different surface treatments on bond strength of resin cement to a CAD/CAM restorative material, J Prosthodont Off J Am Coll Prosthodont, 2016.

A. Bauser, U. Blunck, and A. Chafaie, Concepts cliniques en odontologie conservatrice, 2001.

M. B. Blatz, A. Sadan, and M. Kern, Resin-ceramic bonding : a review of the literature, J Prosthet Dent, vol.89, issue.3, pp.268-74, 2003.

M. Brunet, J. Giacomotti, A. Pecker, and . Céramique, Encyclopaedia Universalis, 2017.

D. Sur,

M. Cardoso, A. De-almeida-neves, A. Mine, E. Coutinho, K. Van-landuyt et al., Current aspects on bonding effectiveness and stability in adhesive dentistry : bonding effectiveness and stability in adhesive dentistry, Aust Dent J, vol.56, pp.31-44, 2011.

I. Cekic-nagas, G. Ergun, F. Egilmez, P. K. Vallittu, and L. Lassila, Micro-shear bond strength of different resin cements to ceramic/glass-polymer CAD-CAM block materials, J Prosthodont Res, vol.60, issue.4, pp.265-73, 2016.

A. Cristian, J. L. Francisco, M. , and G. P. , Correlation between microleakage and absolute marginal discrepancy in zirconia crowns cemented with four resin luting cements : an in vitro study, Int J Dent, vol.2016, pp.1-5, 2016.

G. Davidowitz and P. G. Kotick, The use of CAD/CAM in dentistry, Dent Clin North Am, vol.55, issue.3, pp.559-70, 2011.

J. De-munck, M. Vargas, K. Van-landuyt, K. Hikita, P. Lambrechts et al., Bonding of an autoadhesive luting material to enamel and dentin, Dent Mater Off Publ Acad Dent Mater, vol.20, issue.10, pp.963-71, 2004.

M. Degrange, Les systèmes adhésifs amélo-dentinaires. Les résines composites : applications en dentisterie restauratrice : l'essentiel de « Réalités cliniques, pp.37-57, 2007.

M. Degrange, J. Theimer, and K. , Aspects fondamentaux du collage appliqués à la dentisterie adhésive, Réal Clin, vol.5, issue.4, pp.371-82, 1994.

M. Degrange, M. Sadoun, and N. Heim, Les céramiques dentaires, 2e partie, J Biomater Dent, vol.3, issue.1, pp.61-70, 1987.

F. Descamp, M. Fages, and D. F. La, CFAO en odontologie : les bases, les principes et les systèmes, 2016.

A. C. Diniz, M. C. Bandeca, L. M. Pinheiro, D. Santosh-almeida, L. J. Torres et al., Influence of different etching modes on bond strength to enamel using universal adhesive systems, J Contemp Dent Pract, vol.17, issue.10, pp.820-825, 2016.

V. Dupuis, S. Felenc, and J. Margerit, Les matériaux de l'interface dento-prothétique : scellement et collage, 2011.

F. Duret and . L'empreinte-optique, , 1973.

S. E. Elsaka, Bond strength of novel CAD/CAM restorative materials to self-adhesive resin cement : the effect of surface treatments, J Adhes Dent, vol.16, issue.6, pp.531-571, 2014.

D. Sur,

O. Étienne, Les facettes en céramique, 2013.

D. J. Fasbinder, Chairside CAD/CAM : an overview of restorative material options, Compend Contin Educ Dent, vol.33, issue.1, pp.52-60, 2012.

J. Ferrari and M. Sadoun, Classification des céramiques dentaires, Cah Prothèse, vol.89, pp.17-26, 1995.

R. Frankenberger, V. E. Hartmann, M. Krech, N. Krämer, S. Reich et al., Adhesive luting of new CAD/CAM materials, Int J Comput Dent, vol.18, issue.1, pp.9-20, 2015.

A. Frassetto, L. Breschi, G. Turco, G. Marchesi, D. Lenarda et al., Mechanisms of degradation of the hybrid layer in adhesive dentistry and therapeutic agents to improve bond durability : a literature review, Dent Mater, vol.32, issue.2, pp.41-53, 2016.

M. S. Gale and B. W. Darvell, Thermal cycling procedures for laboratory testing of dental restorations, J Dent, vol.27, issue.2, pp.89-99, 1999.

. Gc-®, , 2012.

D. Sur,

®. Gc and . Cerasmart-tm, , 2014.

D. Sur,

. Gc-®-.-g-multi and . Primer,

D. Sur,

. Gc-®-.-g-multi, Primer : mode d'emploi

D. Sur,

T. M. Gc-®-.-g-cem-linkforce,

D. Sur,

G. Bond,

D. Sur,

G. ®. Initial and T. M. Lrf,

D. Sur,

. Gc-®, Initial TM LRF : mode d'emploi

D. Sur,

M. Giannini, P. Makishi, A. Ayres, P. M. Vermelho, B. M. Fronza et al., Self-Etch adhesive systems : a literature review, Braz Dent J, vol.26, issue.1, pp.3-10, 2015.

S. Gracis, V. P. Thompson, J. L. Ferencz, N. Silva, and E. A. Bonfante, A new classification system for allceramic and ceramic-like restorative materials, Int J Prosthodont, vol.28, issue.3, pp.227-262, 2015.

L. Graiff, C. Piovan, P. Vigolo, and P. N. Mason, Shear bond strength between feldspathic CAD/CAM ceramic and human dentine for two adhesive cements, J Prosthodont Off J Am Coll Prosthodont, vol.17, issue.4, pp.294-303, 2008.

G. B. Guarda, A. B. Correr, L. S. Gonçalves, A. R. Costa, G. A. Borges et al., Effects of surface treatments, thermocycling, and cyclic loading on the bond strength of a resin cement bonded to a lithium disilicate glass ceramic, Oper Dent, vol.38, issue.2, pp.208-225, 2013.

J. Haussonne, C. Carry, P. Bowen, and J. Barton, Céramiques et verres : principes et techniques d'élaboration. Lausanne, Suisse : Éd. Presses polytechniques et universitaires romandes

S. D. Horvath, Key parameters of hybrid materials for CAD/CAM-based restorative dentistry, Compend Contin Educ Dent, vol.37, issue.9, pp.638-681, 2016.

I. Vivadent and ®. L. Strip, , 2003.

D. Sur,

, Ivoclar Vivadent ® . IPS ® Ceramic Etching Gel

D. Sur,

I. Vivadent, ®. Ips-empress, and C. , , 2006.

D. Sur,

I. Vivadent and ®. Ips, , 2009.

D. Sur,

I. Vivadent and ®. Ips-e.max-zircad,

D. Sur,

I. Vivadent, ®. Monobond, and . Plus,

D. Sur,

I. Vivadent, ®. Multilink, and . Automix,

D. Sur,

E. M. Kassotakis, M. Stavridakis, T. Bortolotto, S. Ardu, and I. Krejci, Evaluation of the effect of different surface treatments on luting CAD/CAM composite resin overlay workpieces, J Adhes Dent, vol.17, issue.6, pp.521-529, 2015.

S. Kawano, J. Fu, P. Saikaew, A. A. Chowdhury, N. Fukuzawa et al., Microtensile bond strength of a newly developed resin cement to dentin, Dent Mater J, vol.34, issue.1, pp.61-70, 2015.

C. Kerezoudi, C. Gogos, V. Samanidou, D. Tziafas, and G. Palaghias, Evaluation of monomer leaching from a resin cement through dentin by a novel model, Dent Mater Off Publ Acad Dent Mater, vol.32, issue.11, pp.297-305, 2016.

T. M. Kerr, . Demi, and . Ultra, , 2013.

D. Sur,

D. Sur,

R. Kim, J. Woo, I. Lee, Y. Yi, J. Hwang et al., Performance of universal adhesives on bonding to leucite-reinforced ceramic, Biomater Res, vol.19, p.11, 2015.

C. Knellesen and S. Perelmuter, La prothèse céramo-céramique par CFAO, Quintessence International, 2009.

O. Landwerlin, L'empreinte optique intra-buccale et ses applications au cabinet dentaire. Sarrebruck, Allemagne : Éd. Editions universitaires européennes, 2011.

O. Landwerlin, IDS 2013 -Les nouveautés en CAD/CAM et imagerie 3D pour le cabinet dentaire, Dent Trib, vol.3, issue.2, pp.16-20, 2013.

O. Landwerlin and M. Fages, Empreinte optique : silence on tourne! Strat Prothétique, vol.14, pp.115-143, 2014.

É. Larousse, Microscope optique, 2017.

D. Sur,

N. C. Lawson and J. O. Burgess, Dental ceramics : a current review, Compend Contin Educ Dent, vol.35, issue.3, pp.161-167, 2014.

L. Lazarides and S. Escure, Les empreintes optiques : apports de la CFAO (conception et fabrication assistées par ordinateur). Sarrebruck, Allemagne : Éd. Éditions universitaires européennes

R. Li, T. W. Chow, and J. P. Matinlinna, Ceramic dental biomaterials and CAD/CAM technology : state of the art, J Prosthodont Res, vol.58, issue.4, pp.208-224, 2014.

G. C. Lopes, D. G. Thys, P. Klaus, G. Oliveira, and N. Widmer, Enamel acid etching : a review, Compend Contin Educ Dent, vol.28, issue.1, pp.18-24, 2007.

C. Lung and J. P. Matinlinna, Aspects of silane coupling agents and surface conditioning in dentistry : an overview, Dent Mater Off Publ Acad Dent Mater, vol.28, issue.5, pp.467-77, 2012.

A. K. Mainjot, N. M. Dupont, J. C. Oudkerk, T. Y. Dewael, and M. J. Sadoun, From artisanal to CAD-CAM blocks : state of the art of indirect composites, J Dent Res, vol.95, issue.5, pp.487-95, 2016.

S. Marniquet, J. Tapie, and L. , Fron Chabouis H. Les matériaux usinables en dentisterie restauratrice et en prothèse fixée : Guide pratique et synthétique, Inf Dent, issue.20, pp.1-6, 2014.

N. Masarwa, A. Mohamed, I. Abou-rabii, R. A. Zaghlan, and L. Steier, Longevity of self-etch dentin bonding adhesives compared to etch-and-rinse dentin bonding adhesives : a systematic review, J Evid Based Dent Pract, vol.16, issue.2, pp.96-106, 2016.

D. N. Misra, Adsorption of 4-methacryloxyethyl trimellitate anhydride (4-META) on hydroxyapatite and it's role in composite bonding, J Dent Res, vol.68, issue.1, pp.42-49, 1989.

T. Miyazaki, Y. Hotta, J. Kunii, S. Kuriyama, and Y. Tamaki, A review of dental CAD/CAM : current status and future perspectives from 20 years of experience, Dent Mater J, vol.28, issue.1, pp.44-56, 2009.

W. H. Mörmann, The evolution of the CEREC system, J Am Dent Assoc, vol.137, pp.7-13, 1939.

A. L. Morresi, D. 'amario, M. Capogreco, M. Gatto, R. Marzo et al., Thermal cycling for restorative materials : does a standardized protocol exist in laboratory testing ? a literature review, J Mech Behav Biomed Mater, vol.29, pp.295-308, 2014.

A. Nobuaki, Y. Keiichi, and S. Takashi, Effects of air abrasion with alumina or glass beads on surface characteristics of CAD/CAM composite materials and the bond strength of resin cements, J Appl Oral Sci Rev FOB, vol.23, issue.6, pp.629-665, 2015.

O. Gendrel, A. Allard, Y. Lehmann, N. Sangare, and A. , Collage en odontologie, Encycl Méd Chir -Médecine Buccale, vol.10, issue.3, pp.1-8, 2015.

M. Ozcan and P. K. Vallittu, Effect of surface conditioning methods on the bond strength of luting cement to ceramics, Dent Mater Off Publ Acad Dent Mater, vol.19, issue.8, pp.725-756, 2003.

M. Özcan and C. Volpato, Surface conditioning and bonding protocol for nanocomposite indirect restorations : how and why?, J Adhes Dent, vol.18, issue.1, p.82, 2016.

F. Ozer and M. B. Blatz, Self-etch and etch-and-rinse adhesive systems in clinical dentistry, Compend Contin Educ Dent, vol.34, issue.1, pp.12-14, 2013.

J. Park and Y. Choi, Microtensile bond strength and micromorphologic analysis of surface-treated resin nanoceramics, J Adv Prosthodont, vol.8, issue.4, pp.275-84, 2016.

B. Pelissier, Matériaux et CFAO dentaire, Fil Dent, vol.51, pp.58-62, 2010.

M. Peumans, E. B. Valjakova, D. Munck, J. Mishevska, C. B. Van-meerbeek et al., Bonding effectiveness of luting composites to different CAD/CAM materials, J Adhes Dent, vol.18, issue.4, pp.289-302, 2016.

J. Poujade, C. Zerbib, and D. Serre, Céramiques dentaires. Encycl Méd Chir -Médecine Buccale, pp.1-12, 2008.

C. Prochnow, A. B. Venturini, R. Grasel, M. C. Bottino, and L. F. Valandro, Effect of etching with distinct hydrofluoric acid concentrations on the flexural strength of a lithium disilicate-based glass ceramic, J Biomed Mater Res B Appl Biomater, 2016.

E. D. Rekow, Dental CAD/CAM systems : a 20-year success story, J Am Dent Assoc, vol.137, pp.5-6, 2006.

N. D. Ruse and M. J. Sadoun, Resin-composite blocks for dental CAD/CAM applications, J Dent Res, vol.93, issue.12, pp.1232-1236, 2014.

M. Sadoun and M. Degrange, Les céramiques dentaires, 1ère partie, J Biomater Dent, vol.2, issue.3, pp.215-240, 1986.

M. Santos, M. D. Costa, J. H. Rubo, L. F. Pegoraro, and G. C. Santos, Current all-ceramic systems in dentistry : a review, Compend Contin Educ Dent, vol.36, issue.1, pp.31-38, 2015.

V. Sattabanasuk, P. Charnchairerk, L. Punsukumtana, and M. F. Burrow, Effects of mechanical and chemical surface treatments on the resin-glass ceramic adhesion properties, J Investig Clin Dent, pp.1-9, 2016.

J. Schwenter, F. Schmidli, R. Weiger, and J. Fischer, Adhesive bonding to polymer infiltrated ceramic, Dent Mater J, vol.35, issue.5, pp.796-802, 2016.

S. Shahverdi, S. Canay, E. Sahin, and A. Bilge, Effects of different surface treatment methods on the bond strength of composite resin to porcelain, J Oral Rehabil, vol.25, issue.9, pp.699-705, 1998.

C. Shen, W. Oh, and J. R. Williams, Effect of post-silanization drying on the bond strength of composite to ceramic, J Prosthet Dent, vol.91, issue.5, pp.453-458, 2004.

®. Sirona, ®. Blocs, and P. C. Blocs, , 2011.

D. Sur,

®. Sirona and ®. Blocs-c-in, , 2013.

D. Sur,

®. Sirona, . Cerec, and . Mc-xl, , 2014.

D. Sur,

®. Sirona, C. Blocs, C. Blocs, and . Pc-®,

D. Sur,

®. Sirona,

D. Sur,

®. Sirona and . Zirconia, , 2016.

D. Sur,

E. M. Souza, D. Munck, J. Pongprueksa, P. Van-ende, A. Van-meerbeek et al., Correlative analysis of cementdentin interfaces using an interfacial fracture toughness and micro-tensile bond strength approach, Dent Mater. déc, vol.32, issue.12, pp.1575-85, 2016.

F. A. Spitznagel, A. Vuck, P. C. Gierthmühlen, M. B. Blatz, and S. D. Horvath, Adhesive bonding to hybrid materials : an overview of materials and recommendations, Compend Contin Educ Dent Jamesburg NJ, vol.37, issue.9, pp.630-637, 1995.

C. Stamatacos and J. F. Simon, Cementation of indirect restorations : an overview of resin cements, Compend Contin Educ Dent, vol.34, issue.1, pp.42-46, 2013.

B. Stawarczyk, T. Basler, A. Ender, M. Roos, M. Ozcan et al., Effect of surface conditioning with airborne-particle abrasion on the tensile strength of polymeric CAD/CAM crowns luted with selfadhesive and conventional resin cements, J Prosthet Dent, vol.107, issue.2, pp.94-101, 2012.

T. Suzuki, T. Takamizawa, W. W. Barkmeier, A. Tsujimoto, H. Endo et al., Influence of etching mode on enamel bond durability of universal adhesive systems, Oper Dent, vol.41, issue.5, pp.520-550, 2016.

Y. Taira, M. Sakai, and T. Sawase, Effects of primer containing silane and thiophosphate monomers on bonding resin to a leucite-reinforced ceramic, J Dent, vol.40, issue.5, pp.353-361, 2012.

F. Tian, L. Zhou, Z. Zhang, L. Niu, L. Zhang et al., Paucity of nanolayering in resin-dentin interfaces of MDP-based adhesives, J Dent Res, vol.95, issue.4, pp.380-387, 2016.

A. Tsujimoto, W. W. Barkmeier, T. Takamizawa, M. A. Latta, and M. Miyazaki, Bonding performance and interfacial characteristics of short fiber-reinforced resin composite in comparison with other composite restoratives, Eur J Oral Sci, vol.124, issue.3, pp.301-309, 2016.

B. Van-meerbeek, D. Munck, J. Mattar, D. Van-landuyt, K. Lambrechts et al., Microtensile bond strengths of an etch&rinse and self-etch adhesive to enamel and dentin as a function of surface treatment, Oper Dent, vol.28, issue.5, pp.647-60, 2003.

B. Van-meerbeek, D. Munck, J. Yoshida, Y. Inoue, S. Vargas et al., Buonocore memorial lecture. Adhesion to enamel and dentin : current status and future challenges, Oper Dent, vol.28, issue.3, pp.215-250, 2003.

A. B. Venturini, C. Prochnow, D. Rambo, A. Gundel, and L. F. Valandro, Effect of hydrofluoric acid concentration on resin adhesion to a feldspathic ceramic, J Adhes Dent, vol.17, issue.4, pp.313-333, 2015.

V. ®. In-ceram, , 2006.

D. Sur,

V. ®. In-ceram and ®. Al, , 2007.

D. Sur,

V. ®. In-ceram and ®. Yz, , 2014.

D. Sur,

V. ®. Vitablocs-®,

D. Sur,

V. ®. Enamic and ®. ,

D. Sur,

V. ®. , Enamic ® : le concept

D. Sur,

V. ®. Suprinity and ®. Pc,

D. Sur,

V. ®. Vitablocs-®,

D. Sur,

Y. Wang and P. Spencer, Continuing etching of an all-in-one adhesive in wet dentin tubules, J Dent Res, vol.84, issue.4, pp.350-354, 2005.

T. Yavuz and O. Eraslan, The effect of silane applied to glass ceramics on surface structure and bonding strength at different temperatures, J Adv Prosthodont, vol.8, issue.2, pp.75-84, 2016.

T. Yavuz, Ö. Y. Özy?lmaz, E. Dilber, E. S. Tobi, and H. ?. Kiliç, Effect of Different Surface Treatments on PorcelainResin Bond Strength, J Prosthodont Off J Am Coll Prosthodont, pp.1-9, 2015.

T. W. Yen, R. B. Blackman, and R. J. Baez, Effect of acid etching on the flexural strength of a feldspathic porcelain and a castable glass ceramic, J Prosthet Dent, vol.70, issue.3, pp.224-257, 1993.

Y. Yokota and N. Nishiyama, Determination of molecular species of calcium salts of MDP produced through decalcification of enamel and dentin by MDP-based one-step adhesive, Dent Mater J, vol.34, issue.2, pp.270-279, 2015.

K. Yoshihara, N. Nagaoka, Y. Maruo, G. Nishigawa, M. Irie et al., Sandblasting may damage the surface of composite CAD-CAM blocks, Dent Mater Off Publ Acad Dent Mater, vol.33, issue.3, pp.124-159, 2017.

M. Zimmermann, A. Mehl, and S. Reich, New CAD/CAM materials and blocks for chairside procedures, Int J Comput Dent, vol.16, issue.2, pp.173-81, 2013.