S. Ardu, D. Gutemberg, I. Krejci, A. J. Feilzer, D. Bella et al., Influence of water sorption on resin composite color and color variation amongst various composite brands with identical shade code: An in vitro evaluation, J Dent, vol.39, pp.37-44, 2011.

F. Aytac, E. S. Karaarslan, M. Agaccioglu, E. Tastan, M. Buldur et al., Effects of Novel Finishing and Polishing Systems on Surface Roughness and Morphology of Nanocomposites, J Esthet Restor Dent Off Publ Am Acad Esthet Dent Al, vol.28, issue.4, pp.247-61, 2016.

R. Bagheri, M. F. Burrow, and M. Tyas, Influence of food-simulating solutions and surface finish on susceptibility to staining of aesthetic restorative materials, J Dent, vol.33, issue.5, pp.389-98, 2005.

C. Bollen, P. Lambrechts, and M. Quirynen, Comparison of surface roughness of oral hard materials to the threshold surface roughness for bacterial plaque retention: A review of the literature, Dent Mater, vol.13, issue.4, pp.258-69, 1997.

I. M. Camargo, M. Saiki, M. B. Vasconcellos, and D. M. Avila, Abrasiveness evaluation of silica and calcium carbonate used in the production of dentifrices, J Cosmet Sci, vol.52, issue.3, pp.163-170, 2001.

P. M. Campbell, W. M. Johnston, and W. J. O'brien, Light scattering and gloss of an experimental quartz-filled composite, J Dent Res, vol.65, issue.6, pp.892-896, 1986.

A. Caracostea, N. Morar, A. Florea, A. Soanca, and M. E. Badea, Two-body wear simulation influence on some direct and indirect dental resin biocomposites -A qualitative analysis, Acta Bioeng Biomech, vol.18, issue.3, pp.61-72, 2016.

G. Chladek, K. Basa, J. ?mudzki, P. Malara, A. J. Nowak et al., Influence of aging solutions on wear resistance and hardness of selected resin-based dental composites, Acta Bioeng Biomech, vol.18, issue.3, pp.43-52, 2016.

R. G. Chour, A. Moda, A. Arora, M. Y. Arafath, V. K. Shetty et al., Comparative evaluation of effect of different polishing systems on surface roughness of composite resin: An in vitro study, J Int Soc Prev Community Dent. août, vol.6, issue.2, pp.166-70, 2016.

K. H. Chung, Effects of finishing and polishing procedures on the surface texture of resin composites, Dent Mater Off Publ Acad Dent Mater, vol.10, issue.5, pp.325-355, 1994.

D. Bona, A. Benetti, P. Borba, M. Cecchetti, and D. , Flexural and diametral tensile strength of composite resins, Braz Oral Res, vol.22, issue.1, pp.84-93, 2008.

M. De-menezes, C. P. Turssi, A. T. Hara, D. Messias, and M. C. Serra, Abrasion of eroded root dentine brushed with different toothpastes, Clin Oral Investig, vol.8, issue.3, pp.151-156, 2004.

. De-oliveira, . Aiello, M. Mendes, H. Urban, . Campanha et al., Effect of storage in water and thermocycling on hardness and roughness of resin materials for temporary restorations, Mater Res, vol.13, issue.3, pp.355-364, 2010.

D. Oliveira-daltoé, M. Lepri, C. P. Wiezel, J. Tornavoi, D. C. Agnelli et al., Analysis of the microstructure and mechanical performance of composite resins after accelerated artificial aging, Minerva Stomatol, vol.62, issue.3, pp.63-72, 2013.

Z. Ergücü and L. S. Türkün, Surface roughness of novel resin composites polished with one-step systems, Oper Dent, vol.32, issue.2, pp.185-92, 2007.

J. L. Ferracane, Hygroscopic and hydrolytic effects in dental polymer networks, Dent Mater Off Publ Acad Dent Mater, vol.22, issue.3, pp.211-233, 2006.

C. Floyd and S. H. Dickens, Network structure of Bis-GMA-and UDMA-based resin systems, Dent Mater Off Publ Acad Dent Mater, vol.22, issue.12, pp.1143-1152, 2006.

V. Gajewski, C. S. Pfeifer, N. Fróes-salgado, L. Boaro, and R. R. Braga, Monomers used in resin composites: degree of conversion, mechanical properties and water sorption/solubility, Braz Dent J, vol.23, issue.5, pp.508-522, 2012.

P. N. Gomes, S. C. Dias, M. R. Moyses, L. J. Pereira, B. G. Negrillo et al., Effect of artificial accelerated aging on Vickers microhardness of composite resins, Gen Dent, vol.56, issue.7, pp.695-704, 2008.

M. A. Gonçalves, V. Teixeira, S. Rodrigues, R. De-oliveira, and L. A. Salvio, Evaluation of the roughness of composite resins submitted to different surface treatments, Acta Odontol Latinoam AOL, vol.25, issue.1, pp.89-95, 2012.

R. D. Guiraldo, S. Consani, R. Consani, S. B. Berger, W. B. Mendes et al., Comparison of silorane and methacrylate-based composite resins on the curing light transmission, Braz Dent J, vol.21, issue.6, pp.538-580, 2010.

A. U. Guler, S. Kurt, and T. Kulunk, Effects of various finishing procedures on the staining of provisional restorative materials, J Prosthet Dent, vol.93, issue.5, pp.453-461, 2005.

E. Gusmao, J. Melo, C. Ramos, R. Santos, and A. Araùjo, Aplicabilidade de clinica dos dentifricios, Int J Dent, vol.2, issue.1, pp.231-236, 2003.

S. Hahnel, A. Henrich, R. Bürgers, G. Handel, and M. Rosentritt, Investigation of Mechanical Properties of Modern Dental Composites After Artificial Aging for One Year, Oper Dent, vol.35, issue.4, pp.412-421, 2010.

S. Hahnel, S. Schultz, C. Trempler, B. Ach, G. Handel et al., Two-body wear of dental restorative materials, J Mech Behav Biomed Mater, vol.4, issue.3, pp.237-281, 2011.

I. M. Hamouda, Effects of various beverages on hardness, roughness, and solubility of esthetic restorative materials, J Esthet Restor Dent Off Publ Am Acad Esthet Dent Al, vol.23, issue.5, pp.315-337, 2011.

E. K. Hansen, After-polymerization of visible light activated resins: surface hardness vs. light source, Scand J Dent Res, vol.91, issue.5, pp.406-416, 1983.

S. D. Heintze, M. Forjanic, K. Ohmiti, and V. Rousson, Surface deterioration of dental materials after simulated toothbrushing in relation to brushing time and load, Dent Mater Off Publ Acad Dent Mater, vol.26, issue.4, pp.306-325, 2010.

R. Janda, J. Roulet, M. Latta, and S. Rüttermann, The effects of thermocycling on the flexural strength and flexural modulus of modern resin-based filling materials, Dent Mater, vol.22, issue.12, pp.1103-1111, 2006.

F. F. Jassé, E. A. De-campos, D. Lefever, D. Bella, E. Salomon et al., Influence of filler charge on gloss of composite materials before and after in vitro toothbrushing, J Dent, vol.41, issue.5, pp.41-45, 2013.

H. Kocaagaoglu, T. Aslan, A. Gürbulak, H. Albayrak, Z. Ta?demir et al., Efficacy of polishing kits on the surface roughness and color stability of different composite resins, Niger J Clin Pract, vol.20, issue.5, pp.557-65, 2017.

N. Koottathape, H. Takahashi, N. Iwasaki, M. Kanehira, and W. J. Finger, Morphological features of composite resin surfaces after two-and three-body wear simulation, World J Dent, vol.3, issue.3, pp.221-229, 2012.

R. V. Kumari, H. Nagaraj, K. Siddaraju, and R. K. Poluri, Evaluation of the Effect of Surface Polishing, Oral Beverages and Food Colorants on Color Stability and Surface Roughness of Nanocomposite Resins, J Int Oral Health JIOH, vol.7, issue.7, pp.63-70, 2015.

I. B. Larsen and E. C. Munksgaard, Effect of human saliva on surface degradation of composite resins, Scand J Dent Res, vol.99, issue.3, pp.254-61, 1991.

A. Lee, L. H. He, K. Lyons, and M. V. Swain, Tooth wear and wear investigations in dentistry, J Oral Rehabil, vol.39, issue.3, pp.217-242, 2012.

S. Y. Lee, E. H. Greener, and D. L. Menis, Detection of leached moieties from dental composites in fluids simulating food and saliva, Dent Mater Off Publ Acad Dent Mater, vol.11, issue.6, pp.348-53, 1995.

Y. Lee, H. Lu, M. Oguri, and J. M. Powers, Changes in gloss after simulated generalized wear of composite resins, J Prosthet Dent, vol.94, issue.4, pp.370-376, 2005.

K. F. Leinfelder, S. C. Bayne, and E. J. Swift, Packable Composites: Overview and Technical Considerations, J Esthet Restor Dent, vol.11, issue.5, pp.234-283, 1999.

J. Leprince, G. Leloup, J. Vreven, P. Weiss, and A. Raskin, Polymères et résines composites, Encycl Méd-ChirMédecine Buccale, pp.28-210, 2010.

A. Liljeborg, G. Tellefsen, and G. Johannsen, The use of a profilometer for both quantitative and qualitative measurements of toothpaste abrasivity, Int J Dent Hyg, vol.8, issue.3, pp.237-280, 2010.

L. Marigo, M. Rizzi, L. Torre, G. Rumi, and G. , 3-D surface profile analysis: different finishing methods for resin composites, Oper Dent, vol.26, issue.6, pp.562-570, 2001.

M. Melo, S. Guedes, H. Xu, and L. Rodrigues, Nanotechnology-based restorative materials for dental caries management, Trends Biotechnol, issue.8, p.31, 2013.

H. Minami, S. Hori, H. Kurashige, S. Murahara, K. Muraguchi et al., Effects of Thermal Cycling on Surface Texture of Restorative Composite Materials, Dent Mater J, vol.26, issue.3, pp.316-338, 2007.

S. B. Mitra, D. Wu, and B. N. Holmes, An application of nanotechnology in advanced dental materials, J Am Dent Assoc, vol.134, issue.10, pp.1382-90, 1939.

M. D. Moda, A. G. Godas, L. De, J. C. Fernandes, T. Suzuki et al., Comparison of different polishing methods on the surface roughness of microhybrid, microfill, and nanofill composite resins, J Investig Clin Dent, 2017.

B. Monteiro and A. M. Spohr, Surface Roughness of Composite Resins after Simulated Toothbrushing with Different Dentifrices, J Int Oral Health JIOH, vol.7, issue.7, pp.1-5, 2015.

. Montes-g-gm and R. A. Draughn, In vitro surface degradation of composites by water and thermal cycling, Dent Mater Off Publ Acad Dent Mater, vol.2, issue.5, pp.193-200, 1986.

R. C. De-morais, F. R. Garcia-l-da, and D. R. Cruvinel, Panzeri Pires-de-Souza F de C. Color Stability and Surface Roughness of Composite submitted to Different Types and Periods of Finishing/Polishing: Physical Properties of Composites, J Contemp Dent Pract, vol.16, issue.7, pp.565-70, 2015.

M. Morgan, Finishing and polishing of direct posterior resin restorations, Pract Proced Aesthetic Dent PPAD, vol.16, issue.3, pp.211-218, 2004.

A. L. Morresi, D. 'amario, M. Capogreco, M. Gatto, R. Marzo et al., Thermal cycling for restorative materials: does a standardized protocol exist in laboratory testing? A literature review, J Mech Behav Biomed Mater, vol.29, pp.295-308, 2014.

A. L. Morresi, D. 'amario, M. Monaco, A. Rengo, C. Grassi et al., Effects of critical thermal cycling on the flexural strength of resin composites, J Oral Sci, vol.57, issue.2, pp.137-180, 2015.

W. J. O'brien, W. M. Johnston, F. Fanian, and S. Lambert, The surface roughness and gloss of composites, J Dent Res, vol.63, issue.5, pp.685-693, 1984.

A. De-oliveira, P. Domingos, R. G. Palma-dibb, and P. Garcia, Chemical and morphological features of nanofilled composite resin: influence of finishing and polishing procedures and fluoride solutions, Microsc Res Tech, vol.75, issue.2, pp.212-221, 2012.

M. Paolantonio, D. 'ercole, S. Perinetti, G. Tripodi, D. Catamo et al., Clinical and microbiological effects of different restorative materials on the periodontal tissues adjacent to subgingival class V restorations, J Clin Periodontol, vol.31, issue.3, pp.200-207, 2004.

S. B. Patel, V. V. Gordan, A. A. Barrett, and C. Shen, The effect of surface finishing and storage solutions on the color stability of resin-based composites, J Am Dent Assoc, vol.135, issue.5, pp.587-94, 1939.

C. Pereira and B. Marocho, Thermocycling effect on microhardness of laboratory composite resins, Braz J Oral Sci, vol.6, issue.22, pp.1372-1377, 2007.

M. M. Pérez, R. Ghinea, L. I. Ugarte-alván, R. Pulgar, and R. D. Paravina, Color and translucency in silorane-based resin composite compared to universal and nanofilled composites, J Dent, vol.38, pp.110-116, 2010.

C. P. Pires-de-souza-f-de, F. R. Garcia-l-da, H. M. Hamida, and L. A. Casemiro, Color stability of composites subjected to accelerated aging after curing using either a halogen or a light emitting diode source, Braz Dent J, vol.18, issue.2, pp.119-142, 2007.

A. Raskin, Les résine composites. Société francophone des biomatériaux dentaires, 2009.

A. C. Dos-reis, D. T. De-castro, M. A. Schiavon, L. J. Da-silva, and J. Agnelli, Microstructure and mechanical properties of composite resins subjected to accelerated artificial aging, Braz Dent J, vol.24, issue.6, pp.599-604, 2013.

A. F. Reis, M. Giannini, J. R. Lovadino, and G. M. Ambrosano, Effects of various finishing systems on the surface roughness and staining susceptibility of packable composite resins, Dent Mater Off Publ Acad Dent Mater, vol.19, issue.1, pp.12-20, 2003.

A. V. Ritter, Direct resin-based composites: current recommendations for optimal clinical results, Compend Contin Educ Dent Jamesburg NJ, vol.26, issue.7, p.527, 1995.

. Roselino-l-de-mr and M. A. Chinelatti, Alandia-Román CC, Pires-de-Souza F de CP. Effect of Brushing Time and Dentifrice Abrasiveness on Color Change and Surface Roughness of Resin Composites, Braz Dent J, vol.26, issue.5, pp.507-520, 2015.

F. A. Rueggeberg and D. H. Margeson, The effect of oxygen inhibition on an unfilled/filled composite system, J Dent Res, vol.69, issue.10, pp.1652-1660, 1990.

K. A. Schulze, S. J. Marshall, S. A. Gansky, and G. W. Marshall, Color stability and hardness in dental composites after accelerated aging, Dent Mater Off Publ Acad Dent Mater, vol.19, issue.7, pp.612-621, 2003.

J. C. Setcos, B. Tarim, and S. Suzuki, Surface finish produced on resin composites by new polishing systems, Quintessence Int Berl Ger, vol.30, issue.3, pp.169-73, 1985.

M. Shirinzad, L. Rezaei-soufi, M. S. Mirtorabi, and F. Vahdatinia, Effect of Accelerated Artificial Aging on Translucency of Methacrylate and Silorane-Based Composite Resins, J Dent Tehran Iran, vol.13, issue.2, pp.92-100, 2016.

I. Sideridou, V. Tserki, and G. Papanastasiou, Study of water sorption, solubility and modulus of elasticity of lightcured dimethacrylate-based dental resins, Biomaterials, vol.24, issue.4, pp.655-65, 2003.

D. C. Smisson, K. E. Diefenderfer, and J. M. Strother, Effects of five thermal stressing regimens on the flexural and bond strengths of a hybrid resin composite, Oper Dent, vol.30, issue.3, pp.297-303, 2005.

D. Soares-geraldo, T. Scaramucci, W. Steagall-jr, S. Braga, and M. Sobral, Interaction between staining and degradation of a composite resin in contact with colored foods, Braz Oral Res, vol.25, issue.4, pp.369-75, 2011.

L. Soares, P. Liporoni, and A. A. Martin, The effect of soft-start polymerization by second generation LEDs on the degree of conversion of resin composite, Oper Dent, vol.32, issue.2, pp.160-165, 2007.

K. J. Söderholm, R. Mukherjee, and J. Longmate, Filler leachability of composites stored in distilled water or artificial saliva, J Dent Res, vol.75, issue.9, pp.1692-1701, 1996.

K. J. Söderholm, M. Zigan, M. Ragan, W. Fischlschweiger, and M. Bergman, Hydrolytic degradation of dental composites, J Dent Res, vol.63, issue.10, pp.1248-54, 1984.

, The Dentalist. Le Polissage des Résines Composites

, The Dentalist, 2015.

D. Sur,

F. T. Topcu, G. Sahinkesen, K. Yamanel, U. Erdemir, E. A. Oktay et al., Influence of different drinks on the colour stability of dental resin composites, Eur J Dent, vol.3, issue.1, pp.50-56, 2009.

D. C. Tornavoi, J. Agnelli, H. Panzeri, D. Reis, and A. C. , Color change of composite resins subjected to accelerated artificial aging, Indian J Dent Res Off Publ Indian Soc Dent Res, vol.24, issue.5, pp.605-614, 2013.

A. C. Valinoti, B. G. Neves, E. M. Da-silva, and L. C. Maia, Surface degradation of composite resins by acidic medicines and pH-cycling, J Appl Oral Sci Rev FOB, vol.16, issue.4, pp.257-65, 2008.

D. Venturini, M. S. Cenci, F. F. Demarco, G. B. Camacho, and J. M. Powers, Effect of polishing techniques and time on surface roughness, hardness and microleakage of resin composite restorations, Oper Dent, vol.31, issue.1, pp.11-18, 2006.

F. R. Voltarelli, C. B. Santos-daroz, . Dos, M. C. Alves, A. N. Cavalcanti et al., Effect of chemical degradation followed by toothbrushing on the surface roughness of restorative composites, J Appl Oral Sci Rev FOB, vol.18, issue.6, pp.585-90, 2010.

J. Vreven, A. Raskin, J. Sabbagh, G. Vermeesch, and G. Leloup, Résines composites. Encycl Méd-Chir-Odontol, 2005.

W. Weinmann, C. Thalacker, and R. Guggenberger, Siloranes in dental composites, Dent Mater Off Publ Acad Dent Mater, vol.21, issue.1, pp.68-74, 2005.

A. Wiegand and N. Schlueter, The role of oral hygiene: does toothbrushing harm?, Monogr Oral Sci, vol.25, pp.215-224, 2014.

A. Wonglamsam, K. Kakuta, and H. Ogura, Effects of occlusal and brushing cycles on wear of composite resins in combined wear test, Dent Mater J, vol.27, issue.2, pp.243-50, 2008.

R. D. Yadav, D. Raisingani, D. Jindal, and R. Mathur, A Comparative Analysis of Different Finishing and Polishing Devices on Nanofilled, Microfilled, and Hybrid Composite: A Scanning Electron Microscopy and Profilometric Study, Int J Clin Pediatr Dent, vol.9, issue.3, pp.201-209, 2016.

A. Yap, S. S. Wu, S. Chelvan, and E. Tan, Effect of hygiene maintenance procedures on surface roughness of composite restoratives, Oper Dent, vol.30, issue.1, pp.99-104, 2005.

A. U. Yap, S. H. Tan, S. S. Wee, C. W. Lee, E. L. Lim et al., Chemical degradation of composite restoratives, J Oral Rehabil, vol.28, issue.11, pp.1015-1036, 2001.

C. Yesilyurt, O. Yoldas, S. H. Altintas, and A. Kusgoz, Effects of food-simulating liquids on the mechanical properties of a silorane-based dental composite, Dent Mater J, vol.28, issue.3, pp.362-369, 2009.