, Parmi toutes les techniques étudiées, le sablage permet l'élimination de la totalité du ciment de scellement provisoire sur les échantillons

, Bien que les résultats sur l'apport direct du sablage sur l'adhésion soient controversés, le sablage a un bénéfice indirect sur l'adhésion en permettant une décontamination optimale de la surface de collage

, Quatre articles ont aussi étudié l'apport du sablage sur l'adhésion des composites à l'émail. En tout, 649 échantillons ont été analysés

, Les paramètres de sablage sont les mêmes que ceux utilisés pour le sablage de la dentine

. Erkut, « Effect of different surface-cleaning techniques on the bond strength of composite resin restorations

. Chinelatti, « Analysis of surfaces and adhesive interfaces of enamel and dentin after different treatments

. Souza-zaroni, Adhesion of a self-etching system to dental substrate prepared by Er : YAG laser or air abrasion

. Soares, « Effect of previous treatments on bond strength of two self-etching adhesive systems to dental substrate

. Van-meerbeek, « Microtensile bond strengths of an etch&rinse and self-etch adhesive to enamel and dentin as a function of surface treatment

R. A. Azeem and N. M. Sureshbabu, « Clinical performance of direct versus indirect composite restorations in posterior teeth : a systematic review, Journal of conservative dentistry, vol.21, issue.1, pp.2-9, 2018.

H. Bagheri, T. Hooshmand, and F. Aghajani, « Effect of ceramic surface treatments after machine grinding on the biaxial flexural strength of different CAD/CAM dental ceramics », Journal of dentistry, vol.12, issue.9, pp.621-650, 2015.

A. Baraba, W. Duki?, N. Chieffi, M. Ferraro, S. P. Ribari? et al., « Influence of air abrasion and sonic technique on microtensile bond strength of one-step self-etch adhesive on human dentin, The scientific world journal, pp.1-6, 2015.

S. Baumgartner, D. Koletsi, C. Verna, and T. Eliades, « The effect of enamel sandblasting on enhancing bond strength of orthodontic brackets : a systematic review and meta-analysis ». The journal of adhesive dentistry 19, pp.463-473, 2017.

R. B. Black, Technic for nonmechanical preparation of cavities and prophylaxis ». The journal of the american dental association 32, pp.955-65, 1945.

S. Bouillaguet, J. Meyer, and M. Cattani-lorente, The microtensile bond strength test : new insight into the performance of adhesive resins bonded to dental substrates, vol.1, p.22, 2001.

L. H. Burnett, R. S. Shinkai, and C. D. Eduardo, « Tensile bond strength of a one-bottle adhesive system to indirect composites treated with Er : YAG laser, air abrasion, or fluoridric acid ». Photomedicine and laser surgery 22, pp.351-56, 2004.

M. V. Cardoso, A. De-almeida-neves, A. Mine, E. Coutinho, K. Van-landuyt et al., Current aspects on bonding effectiveness and stability in adhesive dentistry, vol.56, pp.31-44, 2011.

Y. Chaiyabutr, J. C. Et, and . Kois, « The effects of tooth preparation cleansing protocols on the bond strength of self-adhesive resin luting cement to contaminated dentin, Operative dentistry, vol.33, issue.5, pp.556-63, 2008.

P. Chaves, M. Giannini, and G. M. Ambrosano, « Influence of smear layer pretreatments on bond strength to dentin, Journal of adhesive dentistry, vol.4, pp.191-96, 2002.

M. A. Chinelatti, S. A. Corona, M. C. Borsatto, L. F. Ribeiro, R. A. Rocha et al., « Analysis of surfaces and adhesive interfaces of enamel and dentin after different treatments ». Journal of materials science : materials in medicine 18, pp.1465-70, 2007.

M. D'amario, C. Piccioni, S. D. Carlo, F. De-angelis, S. Caruso et al., « Effect of airborne particle abrasion on microtensile bond strength of total-etch adhesives to human dentin, pp.1-7, 2017.

C. D'arcangelo, L. Et, and . Vanini, « Effect of three surface treatments on the adhesive properties of indirect composite restorations, Journal of adhesive dentistry, vol.9, issue.3, pp.319-345, 2007.

S. E. Elsaka, Bond strength of novel CAD/CAM restorative materials to self-adhesive resin cement : the effect of surface treatments, Journal of adhesive dentistry, vol.16, issue.6, pp.531-571, 2014.

S. Erkut, B. Yilmaz, B. Bagis, C. Küçüke?men, E. Ozdemir et al., « Effect of different surfacecleaning techniques on the bond strength of composite resin restorations ». The journal of prosthetic dentistry 112, pp.949-56, 2014.

F. M. França, A. J. Santos, and J. R. Lovadino, « Influence of air abrasion and long-term storage on the bond strength of self-etching adhesives to dentin, Operative dentistry, vol.32, issue.3, pp.217-241, 2007.

R. Freeman, S. Varanasi, I. A. Meyers, and A. L. Symons, « Effect of air abrasion and thermocycling on resin adaptation and shear bond strength to dentin for an etch-and-rinse and self-etch resin adhesive, Dental materials journal, vol.31, issue.2, pp.180-88, 2012.

L. Giachetti, D. Russo, C. Bambi, and R. Grandini, « A review of polymerization shrinkage stress : current techniques for posterior direct resin restorations, The journal of contemporary dental practice, vol.7, issue.4, pp.79-88, 2006.

O. T. Harorli, C. Barutcugil, O. Kirmali, and A. Kapdan, « Shear bond strength of a self-etched resin cement to an indirect composite : effect of different surface treatments, Nigerian journal of clinical practice, vol.18, issue.3, p.405, 2015.

D. R. Haselton, A. M. Diaz-arnold, and J. T. Dunne, « Shear bond strengths of 2 intraoral porcelain repair systems to porcelain or metal substrates ». The journal of prosthetic dentistry 86, pp.526-557, 2001.

V. Hegde, R. Et, and . Khatavkar, « A new dimension to conservative dentistry : air abrasion, Journal of conservative dentistry, vol.13, issue.1, 2010.

S. K. Hummel, V. Marker, L. Pace, and M. Goldfogle, « Surface treatment of indirect resin composite surfaces before cementation ». The journal of prosthetic dentistry 77, pp.70096-70105, 1997.

E. M. Kassotakis, M. Stavridakis, T. Bortolotto, S. Ardu, and E. I. Krejci, « Evaluation of the effect of different surface treatments on luting CAD/CAM composite resin overlay workpieces, Journal of adhesive dentistry, vol.17, issue.6, pp.521-549, 2015.

M. A. Latta and W. W. Barkmeier, « Bond strength of a resin cement to a cured composite inlay material ». The journal of prosthetic dentistry 72, pp.90079-90084, 1994.

U. Lohbauer, S. A. Nikolaenko, A. Petschelt, and R. Frankenberger, « Resin tags do not contribute to dentin adhesion in self-etching adhesives, Journal of adhesive dentistry, vol.10, issue.2, pp.97-103, 2008.

G. C. Lopes, L. N. Baratieri, M. A. De-andrada, and L. C. Vieira, « Dental adhesion : present state of the art and future perspectives, Quintessence international, vol.33, pp.213-237, 2002.

C. Y. Lung and J. P. Matinlinna, « Aspects of silane coupling agents and surface conditioning in dentistry : an overview, Dental materials, vol.28, issue.5, pp.467-77, 2012.

S. J. Marshall, S. C. Bayne, R. Baier, A. P. Tomsia, G. W. Marshall-;-nishigawa et al., « Various effects of sandblasting of dental restorative materials, Rittschof. Plos one, vol.26, issue.2, p.147077, 2010.

M. T. Oliveira, P. M. De, C. De-freitas, G. M. De-paula-eduardo, M. Ambrosano et al., « Influence of diamond sono-abrasion, air-abrasion and Er : YAG laser irradiation on bonding of different adhesive systems to dentin, European journal of dentistry, vol.1, issue.3, pp.158-66, 2007.

M. Ozcan, J. Raadschelders, P. Vallittu, and L. Lassilla, « Effect of particle deposition parameters on silica coating of zirconia using a chairside air-abrasion device ». The journal of adhesive dentistry 15, pp.211-225, 2013.

D. H. Pashley, R. M. Carvalho, H. Sano, M. Nakajima, M. Yoshiyama et al., The microtensile bond test : a review, vol.1, pp.299-309, 1999.

T. Pioch, S. Stotz, E. Buff, H. Duschner, and H. J. Staehle, « Influence of different etching times on hybrid layer formation and tensile bond strength, American journal of dentistry, vol.11, issue.5, pp.202-208, 1998.

A. Poitevin, J. De-munck, K. Van-landuyt, E. Coutinho, M. Peumans et al., « Critical analysis of the influence of different parameters on the microtensile bond strength of adhesives to dentin, Journal of adhesive dentistry, vol.10, issue.1, pp.7-16, 2008.

S. Pollington, A. Fabianelli, and R. Van-noort, « Microtensile bond strength of a resin cement to a novel fluorcanasite glass-ceramic following different surface treatments, Dental materials, vol.26, issue.9, pp.864-72, 2010.

L. T. Poskus, R. S. Meirelles, V. B. Schuina, L. M. Ferreira, E. M. Da-silva et al., « Effects of different surface treatments on bond strength of an indirect composite to bovine dentin, Indian journal of dental research, vol.26, issue.3, p.289, 2015.

C. F. Rafael, V. Quinelato, C. S. Morsch, G. Dedeus, and C. M. Reis, « Morphological analysis of dentin surface after conditioning with two different methods : chemical and mechanical ». The journal of contemporary dental practice 17, pp.58-62, 2016.

J. T. Rainey, Air abrasion : an emerging standard of care in conservative operative dentistry, vol.46, pp.11-19, 2002.

M. Reymus, M. Roos, M. Eichberger, D. Edelhoff, R. Hickel et al., « Bonding to new CAD/CAM resin composites : influence of air abrasion and conditioning agents as pretreatment strategy, Clinical oral investigations, 2018.

P. J. Rinaudo, M. A. Cochran, and B. K. Moore, « The effect of air abrasion on shear bond strength to dentin with dental adhesives, Operative dentistry, vol.22, issue.6, pp.254-59, 1997.

L. B. Roeder, E. A. Berry, C. You, and J. M. Powers, « Bond strength of composite to air-abraded enamel and dentin, Operative dentistry, vol.20, issue.5, pp.186-90, 1995.

H. Sano, T. Shono, H. Sonoda, T. Takatsu, B. Ciucchi et al., « Relationship between surface area for adhesion and tensile bond strength : evaluation of a micro-tensile bond test, Dental materials, vol.10, issue.4, pp.90067-90068, 1994.

Y. Shimada, J. Et, and . Tagami, « Effects of regional enamel and prism orientation on resin bonding, Operative dentistry, vol.28, issue.1, pp.20-27, 2003.

C. J. Soares, C. G. Castro, and P. C. Filho, Soares da Mota. « Effect of previous treatments on bond strength of two self-etching adhesive systems to dental substrate, Journal of adhesive dentistry, vol.9, issue.3, pp.291-96, 2007.

C. J. Soares, M. Giannini, M. T. Oliveira, L. A. Paulillo, and L. R. Martins, « Effect of surface treatments of laboratory-fabricated composites on the microtensile bond strength to a luting resin cement, Journal of applied oral science, vol.12, issue.1, pp.45-50, 2004.

W. C. Souza-zaroni, M. A. Chinelatti, C. S. Delfino, J. D. Pécora, R. G. Palma-dibb et al., Adhesion of a self-etching system to dental substrate prepared by Er : YAG laser or air abrasion, Journal of biomedical materials research part b : applied biomaterials 86B, pp.321-350, 2008.

B. Stawarczyk, T. Basler, A. Ender, M. Roos, M. Özcan et al., « Effect of surface conditioning with airborne-particle abrasion on the tensile strength of polymeric CAD/CAM crowns luted with self-adhesive and conventional resin cements ». The journal of prosthetic dentistry 107, pp.60031-60037, 2012.

B. G. Sutil and A. H. Susin, « Dentin pretreatment and adhesive temperature as affecting factors on bond strength of a universal adhesive system, Journal of applied oral science, vol.25, issue.5, pp.533-573, 2017.

E. J. Swift, C. Brodeur, E. Cvitko, and J. A. Pires, « Treatment of composite surfaces for indirect bonding, Dental materials, vol.8, p.90082, 1992.

L. Tao, D. H. Pashley, L. Boyd, G. E. King, and J. A. Horner, « Scanning electron microscopy of the substructure of smear layers in human dentine, Archives of oral biology, vol.33, issue.4, pp.265-70, 1988.

B. Van-meerbeek, J. De-munck, D. Mattar, E. P. Van-landuyt, and . Lambrechts, « Microtensile bond strengths of an etch&rinse and self-etch adhesive to enamel and dentin as a function of surface treatment, Operative dentistry, vol.28, issue.5, pp.647-60, 2003.

B. Yang, S. Wolfart, M. Scharnberg, K. Ludwig, R. Adelung et al., « Influence of contamination on zirconia ceramic bonding, Journal of dental research, vol.86, pp.749-53, 2007.

K. Yoshihara, N. Nagaoka, Y. Maruo, G. Nishigawa, M. Irie et al., « Sandblasting may damage the surface of composite CAD-CAM blocks, Dental materials, vol.33, issue.3, pp.124-159, 2017.