, La zircone, malgré son absence de phase vitreuse, ne peut aujourd'hui plus être considérée comme un matériau « incollable » sur les tissus dentaires. La durabilité de son assemblage adhésif est ainsi permise par des procédés mécaniques et chimiques, permettant d'obtenir une liaison fiable entre la dent

L. , Un monomère de phosphate fonctionnel : le 10-MDP (10-méthacryloyloxydecyl dihydrogène phosphate), couplé à un silane (Monobond Plus Ivoclar Vivodent ou Clearfil Ceramic Primer de Kuraray) et appliqué comme primer, permettra ensuite d'induire une adhésion chimique. En effet, le silane, bien qu'ayant peu d'affinité pour la zircone en elle-même, va interagir avec la silice présente à la surface de la pièce prothétique engendrant la formation de liaisons siloxane

, Sablage réactif/tribo-chimique de la zircone, particules < 50 µm et pression de 1-2 bars 2. Application d'un primaire d'adhésion contenant 10-MDP et un silane 3. Assemblage avec une colle à base de résine composite et polymérisation

, Aux tenons fibrés

. Le-module-d&apos;élasticité-d&apos;un-tenon and . Fibré, GPa), proche de celui de la dentine, en fait une alternative de choix dans certaines situations cliniques aux reconstitutions coronaires partielles indirectes en métal

, Un tenon fibré est composé entre 60 et 66 % de fibres de verre ou de quartz liées par une matrice polymérique à base de résine époxy à haut degré de conversion. Les principaux avantages de ce type de tenon sont ses qualités esthétiques bien supérieures à celui d'un tenon métallique, son respect de l'anatomie dentinaire (pas de nécessité d'éliminer les contre-dépouilles), son absence de corrosivité et sa meilleure répartition des contraintes

, Outre la préparation standardisée de la dent pour le collage comme cela a été cité précédemment, une désobturation minutieuse (longueur du tenon = longueur de la reconstitution coronaire) et contrôlée (réalisation d'une radiographie pré-opératoire) sera effectuée en amont du protocole de collage. Dans les cas des tenons fibrés à base de résine Bis-GMA, leur traitement sera identique à celui des restaurations indirectes, p.56

, Mordançage acide fluorhydrique 9,6 % pendant 15-60 s ou acide orthophosphorique 37% pendant 15 s permettant la création d'une micro-rugosité de surface et l'optimisation de la liaison entre les groupements méthacrylates de la résine et les fibres du tenon 2. Application de silane, attendre 1 min puis sécher avec une seringue à air sans eau

, Injection de la résine de collage (duale) dans la préparation canalaire et insertion du tenon et photo-polymérisation

, Préparation périphérique du moignon coronaire ainsi créé et contrôle radiographique postopératoire

, Aux alliages métalliques

, Le collage sur des alliages métalliques précieux, semi précieux ou non-précieux intervient principalement lors de la réparation de fractures de matériaux cosmétiques sur des prothèses dentoportées ou implanto-portées avec infrastructure métallique, engendrant un dilemme esthétique et mécanique. Ces pertes de substances peuvent avoir plusieurs étiologies notamment un non-respect des épaisseurs de réductions

, Un collage direct sur ces matériaux ne pouvant être envisagé, une préparation de la surface sera indispensable avant de pouvoir réparer la fracture et créer une liaison durable entre le matériau de réparation et l'infrastructure

, Sablage tribochimique avec des particules d'alumine Al2O3 recouverte de silice pendant 15-30s permettant une vitrification du métal ? Micro-clavetage de la surface et possibilité de liaison chimique avec le silane

, Mordançage acide fluorhydrique 37 % de la céramique + rinçage abondant et séchage ? Obtention d'une rugosité de surface améliorant la rétention du matériau de réparation

, Application de silane et séchage avec une seringue à air sans eau ? Création de la liaison entre la résine composite et la silice déposée à la surface du métal

, Application d'un opaque si besoin

, Stratification avec de la résine composite, polymérisation et réglages de l'occlusion CONCLUSION

, L'émergence d'une dentisterie adhésive vise à réduire la iatrogénie des préparations, en favorisant la conservation d'un maximum de tissus sains

, La rétention mécanique n'est plus à tout prix recherchée aujourd'hui, la liaison physico-chimique prenant le relai et assurant la longévité de la restauration

L. Silane, joue un rôle central dans cette évolution, grâce à sa capacité à créer des liaisons avec la partie minérale des biomatériaux et de la résine (charges) mais aussi avec la partie organique de la matrice résineuse. Son utilisation demande cependant une compréhension de son mécanisme d'action et une rigueur dans sa mise en oeuvre

, La démocratisation des restaurations indirectes collées promeut le silane en tant qu'outil indispensable de l'arsenal thérapeutique du chirurgien-dentiste du futur

U. Deschler, P. Kleinschmit, and P. Panster, 3-Chloropropyltrialkoxysilanes: Key Intermediates for the Commercial Production of Organofunctionalized Silanes and Polysiloxanes, Angewandte Chemie International Edition in English. mars, vol.25, issue.3, pp.236-52, 1986.

J. P. Matinlinna, C. Lung, and J. Tsoi, Silane adhesion mechanism in dental applications and surface treatments: A review, Dental Materials. 1 janv, vol.34, issue.1, pp.13-28, 2018.

J. M. Antonucci, S. H. Dickens, B. O. Fowler, H. H. Xu, and W. G. Mcdonough, Chemistry of Silanes: Interfaces in Dental Polymers and Composites, J Res Natl Inst Stand Technol, vol.110, issue.5, pp.541-58, 2005.

T. T. Heikkinen, J. P. Matinlinna, P. K. Vallittu, and L. Lassila, Long Term Water Storage Deteriorates Bonding of Composite Resin to Alumina and Zirconia Short Communication. The Open Dentistry Journal, 2013.

B. Arkles, Silane Coupling Agents : Connecting across Boundaries, 2006.

C. J. Brinker, Hydrolysis and condensation of silicates: Effects on structure, Journal of Non-Crystalline Solids. 1 mars, vol.100, issue.1-3, pp.31-50, 1988.

H. Jiang, Z. Zheng, Z. Li, and X. Wang, Effects of Temperature and Solvent on the Hydrolysis of Alkoxysilane under Alkaline Conditions, Ind Eng Chem Res. 6 déc, vol.45, issue.25, pp.8617-8639, 2006.

R. C. Chambers, W. E. Jones, Y. Haruvy, S. E. Webber, and M. A. Fox, Influence of steric effects on the kinetics of ethyltrimethoxysilane hydrolysis in a fast sol-gel system, Chem Mater, vol.5, issue.10, pp.1481-1487, 1993.

T. Hooshmand, R. Van-noort, and A. Keshvad, Storage effect of a pre-activated silane on the resin to ceramic bond, Dental Materials. 1 sept, vol.20, issue.7, pp.635-677, 2004.

, Pluedmann Edwin P. Silane Coupling Agents. Spinger, vol.253, 1991.

T. Miyazaki, T. Nakamura, H. Matsumura, S. Ban, and T. Kobayashi, Current status of zirconia restoration, Journal of Prosthodontic Research, vol.57, issue.4, pp.236-61, 2013.

J. R. Kelly and P. Benetti, Ceramic materials in dentistry: historical evolution and current practice, Australian Dental Journal, vol.56, issue.s1, pp.84-96, 2011.

J. Poujade, C. Zerbib, and D. Serre, Céramiques dentaires, EMC -Dentisterie. 1 mai, vol.1, issue.2, pp.101-118, 2004.

J. Dejou, Société Francophone de Biomatériaux Dentaires. Les céramiques, 2010.

G. Willems, P. Lambrechts, M. Braem, J. P. Celis, and G. Vanherle, A classification of dental composites according to their morphological and mechanical characteristics, Dental Materials. sept, vol.8, issue.5, pp.310-319, 1992.

A. H. García, M. Lozano, J. C. Vila, A. B. Escribano, and P. F. Galve, Composite resins. A review of the materials and clinical indications, Clinical Dentistry, p.6

H. Tassery, . ;-h-tassery, and . Salomon, Les résines composites: propriétés et indications cliniques A Raskin, 2005.

R. L. Sakaguchi and J. M. Powers, Restorative Dentals Materials, vol.480, 2012.

J. C. Wataha and R. L. Messer, Casting alloys, Dental Clinics of North America. 1 avr, vol.48, issue.2, pp.499-512, 2004.

M. Roach, Base Metal Alloys Used for Dental Restorations and Implants, Dental Clinics of North America. 1 juill, vol.51, issue.3, pp.603-630, 2007.

W. Joseph and O. Brien, Dental Materials and Their Selection, Quintessence International, 1997.

J. L. Ferracane, Materials in Dentistry : Principles and Applications. Lippinott, vol.360, 1995.

G. Nishigawa, Y. Maruo, M. Irie, N. Maeda, K. Yoshihara et al., Various Effects of Sandblasting of Dental Restorative Materials, PLoS One. 14 janv, vol.11, issue.1, pp.147077-0147077, 2016.

R. K. Chintapalli, F. G. Marro, E. Jimenez-pique, and M. Anglada, Phase transformation and subsurface damage in 3Y-TZP after sandblasting, Dental Materials. mai, vol.29, issue.5, pp.566-72, 2013.

M. He, Z. Zhang, D. Zheng, N. Ding, and Y. Liu, Effect of sandblasting on surface roughness of zirconiabased ceramics and shear bond strength of veneering porcelain, Dental Materials Journal, vol.33, issue.6, pp.778-85, 2014.

R. Pilo, M. Dimitriadi, A. Palaghia, and G. Eliades, Effect of tribochemical treatments and silane reactivity on resin bonding to zirconia, Dental Materials, vol.34, issue.2, pp.306-322, 2018.

M. Özcan and P. K. Vallittu, Effect of surface conditioning methods on the bond strength of luting cement to ceramics, Dental Materials. 1 déc, vol.19, issue.8, pp.725-756, 2003.

B. Yang, A. Barloi, and M. Kern, Influence of air-abrasion on zirconia ceramic bonding using an adhesive composite resin, Dental Materials. 1 janv, vol.26, issue.1, pp.44-50, 2010.

A. A. Khan, B. A. Mohamed, E. H. Mirza, J. Syed, D. D. Divakar et al., Surface wettability and nano roughness at different grit blasting operational pressures and their effects on resin cement to zirconia adhesion, Dental Materials Journal, vol.38, issue.3, pp.388-95, 2019.

S. Ban, Y. Iwaya, H. Kono, and H. Sato, Surface modification of titanium by etching in concentrated sulfuric acid, Dental Materials. déc, vol.22, issue.12, pp.1115-1135, 2006.

C. Lung, E. Kukk, T. Hägerth, and J. P. Matinlinna, Surface modification of silica-coated zirconia by chemical treatments, Applied Surface Science. 1 déc, vol.257, issue.4, pp.1228-1263, 2010.

T. Tian, J. Tsoi, J. P. Matinlinna, and M. F. Burrow, Aspects of bonding between resin luting cements and glass ceramic materials, Dental Materials. 1 juill, vol.30, issue.7, pp.147-62, 2014.

G. A. Borges, A. M. Sophr, M. F. De-goes, L. C. Sobrinho, and D. Chan, Effect of etching and airborne particle abrasion on the microstructure of different dental ceramics, Journal of Prosthetic Dentistry. 1 mai, vol.89, issue.5, pp.479-88, 2003.

A. H. Susin, L. S. Alves, G. P. Melo, . De, and T. L. Lenzi, Comparative scanning electron microscopic study of the effect of different dental conditioners on dentin micromorphology, J Appl Oral Sci, vol.16, issue.2, pp.100-105, 2008.

M. S. Shinohara, M. T. De-oliveira, D. Hipólito, V. Giannini, M. De-goes et al., SEM analysis of the acidetched enamel patterns promoted by acidic monomers and phosphoric acids, J Appl Oral Sci. déc, vol.14, issue.6, pp.427-462, 2006.

M. Akhoundi, A. Etemadi, M. Nasiri, and E. S. Borujeni, Comparison of Enamel Morphologic Characteristics after Conditioning with Various Combinations of Acid Etchant and Er:YAG Laser in Bonding and Rebonding Procedures: A SEM Analysis, J Dent, vol.14, issue.3, pp.144-52, 2017.

M. Paranhos, . Burnett, . Luiz-henrique, and P. Magne, Effect of Nd:YAG laser and CO2 laser treatment on the resin bond strength to zirconia ceramic, Quintessence International. janv, vol.42, issue.1, pp.79-89, 2011.

J. Stroumza, Apport des lasers en odontologie, Actualités Odonto-Stomatologiques. sept, issue.272, pp.2-14, 2015.

S. Arami, M. H. Tabatabae, S. F. Namdar, and N. Chiniforush, Effects of different lasers and particle abrasion on surface characteristics of zirconia ceramics, J Dent (Téhéran). mars, vol.11, issue.2, pp.233-274, 2014.

F. V. Martins, C. T. Mattos, W. Cordeiro, and E. M. Fonseca, Evaluation of zirconia surface roughness after aluminum oxide airborne-particle abrasion and the erbium-YAG, neodymium-doped YAG, or CO2 lasers: A systematic review and meta-analysis, The Journal of Prosthetic Dentistry, vol.121, issue.6, pp.895-903, 2019.

H. Kolodney, A. D. Puckett, and K. Brown, Shear strength of laboratory-processed composite resins bonded to a silane-coated nickel-chromium-beryllium alloy, Journal of Prosthetic Dentistry. 1 mars, vol.67, issue.3, pp.419-441, 1992.

R. Janda, J. Roulet, M. Wulf, and H. Tiller, Resin/Resin Bonding: A New Adhesive Technology, Journal of Adhesive Dentistry. déc, vol.4, issue.4, pp.299-308, 2002.

J. R. Piascik, E. J. Swift, K. Braswell, and B. R. Stoner, Surface fluorination of zirconia: Adhesive bond strength comparison to commercial primers, Dental Materials. 1 juin, vol.28, issue.6, pp.604-612, 2012.

J. R. Piascik, S. D. Wolter, and B. R. Stoner, Development of a novel surface modification for improved bonding to zirconia, Dental Materials. 1 mai, vol.27, issue.5, pp.99-105, 2011.

V. Satulu, D. M. Ionita, S. Vizireanu, B. Mitu, and G. Dinescu, Plasma Processing with Fluorine Chemistry for Modification of Surfaces Wettability, Molecules, vol.21, issue.12, 2016.

S. Karthigeyan, A. J. Ravindran, R. Bhat, M. N. Nageshwarao, S. V. Murugesan et al., Surface Modification Techniques for Zirconia-Based Bioceramics: A Review, J Pharm Bioallied Sci. mai, vol.11, issue.2, pp.131-135, 2019.

C. Lung, D. Liu, and J. P. Matinlinna, Surface treatment of titanium by a polydimethylsiloxane coating on bond strength of resin to titanium, Journal of the Mechanical Behavior of Biomedical Materials. 1 janv, vol.41, pp.168-76, 2015.

C. Romain and A. Anthony, Assemblage des restaurations indirectes, Réalités Cliniques. 15 déc, vol.25, issue.4, 2014.

P. Magne, Restaurations adhésives en céramique sur dents antérieures : Approche biomimétique, Quintessence International, vol.406, 2003.

G. Gürel, Les facettes en céramique : De la théorie à la pratique. Quintessence international, 2005.

M. Özcan and M. Bernasconi, Adhesion to Zirconia Used for Dental Restorations: A Systematic Review and Meta-Analysis, Journal of Adhesive Dentistry. janv, vol.17, issue.1, pp.7-26, 2015.

M. Inokoshi, D. Munck, J. Minakuchi, S. Van-meerbeek, and B. , Meta-analysis of Bonding Effectiveness to Zirconia Ceramics, Journal of Dental Research. avr, vol.93, issue.4, pp.329-363, 2014.

M. Le, C. Larsson, and E. Papia, Bond strength between MDP-based cement and translucent zirconia, Dental Materials Journal, vol.38, issue.3, pp.480-489, 2019.

R. Lima, S. C. Barreto, N. M. Alfrisany, T. S. Porto, D. Souza et al., Effect of silane and MDP-based primers on physico-chemical properties of zirconia and its bond strength to resin cement, Dental Materials. 6 août, 2019.

C. Majeti, C. Veeramachaneni, P. K. Morisetty, S. A. Rao, and M. Tummala, A simplified etching technique to improve the adhesion of fiber post, Journal of Advanced Prosthodontics. août, vol.6, issue.4, pp.295-301, 2014.

K. Bitter, J. Noetzel, K. Neumann, and A. M. Kielbassa, Effect of silanization on bond strengths of fiber posts to various resin cements, Quintessence International. févr, vol.38, issue.2, pp.121-129, 2007.

J. Aksornmuang, C. Chienarrom, and . Chittithaworn-n, Effects of various etching protocols on the flexural properties and surface topography of fiber-reinforced composite dental posts, Dental Materials Journal, vol.36, issue.5, pp.614-635, 2017.

P. Bataillon-linez, M. Linez, and E. Deveaux, Les RMIPP à tenon fibré : quand, pourquoi, comment ? Revue d'Odonto-Stomatolgie, pp.187-209, 2010.

C. D&apos;arcangelo, L. Vanini, M. Casinelli, M. Frascaria, F. D. Angelis et al., Adhesive Cementation of Indirect Composite Inlays and Onlays: A Literature Review, Compendium of Continuing Education in Dentistry, vol.36, issue.8, pp.570-81, 2015.

C. D&apos;arcangelo and L. Vanini, Effect of Three Surface Treatments on the Adhesive Properties of Indirect Composite Restorations, Journal of Adhesive Dentistry. mai, vol.9, issue.3, pp.319-345, 2007.

M. Özcan and W. Niedermeier, Clinical Study on the Reasons for and Location of Failures of Metal-Ceramic Restorations and Survival of Repairs, International Journal of Prosthodontics. 5 juin, vol.15, issue.3, pp.299-302, 2002.

S. Kwon, B. K. Min, J. S. Son, and T. Kwon, Resin Bonding to Type IV Gold Alloy Conditioned with a Novel Mercapto Silane System: Effect of Incorporation of a Phosphate Monomer, Journal of Nanoscience and Nanotechnology. 1 févr, vol.18, issue.2, pp.1308-1319, 2018.

R. Frankenberger, N. Kramer, and J. Sindel, Repair strength of etched vs silica-coated metal-ceramic and all ceramic restorations, Operative Dentistry, issue.25, pp.209-224