. .. Généralités,

L. Matériaux-hybrides-en and C. .. , 5.2. L'Enamic® de Vita?,PICN (polymer infiltrated ceramic network material )

. .. Conclusion,

. .. Bibliographie,

, Il s'agit d'une céramique relativement opaque par nature et est indiquée pour la fabrication de coiffes

, Les taux de survie cumulés des couronnes antérieure et postérieure Procera ? AllCeram sont d'environ 97 % après 5 ans et de 93,5 % après 10 ans, vol.49, p.50

, Des études ont rapporté plus d'échecs dans la région postérieure, plus élevés au niveau des molaires que les prémolaires, p.515253

, L'ajustement marginal des restaurations Procera ? AllCeram est compris entre 60 et 80?m, p.5455

R. Li, T. W. Chow, . Et-jukka-pekka, and . Matinlinna, Ceramic dental biomaterials and CAD/CAM technology: state of the art

. Santos, « Current all-ceramic systems in dentistry: a review

P. Odman and B. Andersson, Procera AllCeram crowns followed for 5 to 10.5 Years: a prospective clinical study»

. Fradeani, « Five-year follow-up with procera all-ceramic crowns

P. Odman and B. Andersson, « Procera AllCeram crowns followed for 5 to 10.5 years: a prospective clinical study

H. Michael and . Walter, « Six-year clinical performance of all-ceramic crowns with alumina cores

A. Kassem and E. El-mowafy, Survival rates of porcelain molar crowns-an update

K. B. May, « Precision of fit: the procera allceram crown

. Limkangwalmongkol, « Comparison of marginal fit between all-porcelain margin versus alumina-supported margin on procera alumina crowns

, Ce mécanisme empêche la propagation de la fissure résultant en une augmentation des propriétés mécaniques

, La zircone a une grande ténacité à la rupture, 9-10 MPa et la résistance à la flexion, pp.900-1200

. Miyazaki, « Current status of zirconia restoration

. Philipp, « Novel ceria-stabilized tetragonal zirconia/alumina nanocomposite as framework material for posterior fixed dental prostheses: preliminary results of a prospective case series at 1 year of function

. Roediger, « Prospective evaluation of zirconia posterior fixed partial dentures: four-year clinical results

M. Vigolo, « Evaluation of zirconium-oxide-based ceramic single-unit posterior fixed dental prostheses (fdps) generated with two cad/cam systems compared to porcelain-fused-to-metal single-unit posterior fdps: a 5-year clinical prospective study

K. Ortorp and . Et-carlsson, « A 5-year retrospective study of survival of zirconia single crowns fitted in a private clinical setting

. Kern, « Five-year clinical evaluation of all-ceramic posterior fdps made of in-ceram zirconia

. Salido, « Prospective clinical study of zirconia-based posterior four-unit fixed dental prostheses: four-year followup

. Pelaez, « A four-year prospective clinical evaluation of zirconia and metal-ceramic posterior fixed dental prostheses

. Rinke, « Prospective evaluation of zirconia posterior fixed partial dentures: 7-year clinical results

«. Horvath, Key parameters of hybrid materials for cad/cam-based restorative dentistry

. Mainjot, « From Artisanal to CAD-CAM Blocks : state of the art of indirect composites

«. Horvath, Key parameters of hybrid materials for cad/cam-based restorative dentistry

. Horvath,

. Swain, « Interpenetrating network ceramic-resin composite dental restorative materials

. Mainjot, « From Artisanal to CAD-CAM Blocks : state of the art of indirect composites

. Spitznagel, Adhesive bonding to hybrid materials: an overview of materials and recommendations

. Mainjot, « From Artisanal to CAD-CAM Blocks : state of the art of indirect composites

. Swain, « Interpenetrating network ceramic-resin composite dental restorative materials

. Silva, « Dental ceramics: a review of new materials and processing methods

. Lambert, Dental biomaterials for chairside CAD/CAM: State of the art

. Dans-la-même-lignée-de-cerasmart, Shofu Inc., a commercialisé Shofu Block HC. Composé de 61% de particules de céramiques, il possède les mêmes propriétés et indications que Cerasmart de GC, p.130131

, Suite à cette analyse précédente, on arrive à séparer les matériaux hybrides en 2 groupes : les

. Spitznagel, Adhesive bonding to hybrid materials: an overview of materials and recommendations

«. Horvath, Key parameters of hybrid materials for cad/cam-based restorative dentistry

N. Bibliographie-alqahtani, Optical properties of CAD-CAM lithium disilicate glass-ceramic in different firing temperatures and thicknesses, 2016.

A. N. , R. , K. K. Weber, and . Biomaterials, , 2018.

G. Arnetzl, « Different ceramic technologies in a clinical long-term comparison, State of the art of CAD/CAM restorations : 20 years of CEREC, édité par W.H. Mörmann, pp.65-72, 2006.

M. Bartala, F. Et, . Duret, and . La, , 2014.

M. Borba, M. D. De-araújo, K. A. Fukushima, H. N. Yoshimura, P. F. Cesar et al., , pp.710-731, 2011.

S. Bouillaguet, Spécificité des Biomatériaux inlays-onlays adhésifs : pourquoi ? comment ? » Le journal de la SOP 14, p.25, 2011.

J. Chai, F. C. Chu, T. W. Chow, and B. M. Liang, « Chemical solubility and flexural strength of zirconia-based ceramics ». The international journal of prosthodontics 20, pp.587-95, 2007.

G. J. Christensen, Choosing an all-ceramic restorative material : porcelain-fused-to-metal or zirconia-based ?, Journal of the american dental association, vol.138, issue.5, pp.662-65, 2007.

M. Cordelette, F. Et, and . Jordan-combarieu, Évolutions majeures de la CFAO directe ». ID.L'Information dentaire 96, vol.20, pp.38-42, 2014.

I. Denry, J. Et, and . Holloway, « Ceramics for dental applications: a review, Materials, vol.3, issue.1, pp.351-68, 2010.

A. Ender, A. Et, and . Mehl, « Accuracy of complete-arch dental impressions : a new method of measuring trueness and precision ». The journal of prosthetic dentistry 109, pp.60028-60029, 2013.

D. J. Fasbinder, J. B. Dennison, D. Heys, and E. G. Neiva, « A clinical evaluation of chairside lithium disilicate cad/cam crowns : a two-year report », Journal of the american dental association, vol.141, issue.2, pp.10-14, 2010.

M. Fradeani, M. D'amelio, M. Redemagni, and M. Corrado, « Five-year follow-up with procera allceramic crowns, Quintessence international, vol.36, issue.2, pp.105-118, 2005.

M. Guazzato, M. Albakry, S. P. Ringer, and M. V. Swain, « Strength, fracture toughness and microstructure of a selection of all-ceramic materials. part i. pressable and alumina glass-infiltrated ceramics, Dental materials, vol.20, issue.5, pp.255-77, 2004.

J. Güth, D. Edelhoff, H. Ihloff, and G. Mast, « Complete mouth rehabilitation after transposition osteotomy based on intraoral scanning : an experimental approach ». The journal of prosthetic dentistry 112, pp.89-93, 2014.

W. Höland, G. H. Et, and . Beall, Glass-ceramic technology : holand/glass ceramic technology, 2012.

M. Hollender, Y. Allard, J. Richelme, J. P. Casu, C. La et al., , 2014.

S. D. Horvath, Key parameters of hybrid materials for cad/cam-based restorative dentistry, vol.37, pp.638-681, 2016.

. Ivoclar-vivadent.-«-ips-e, Ivoclar vivadent AG scientific services, 2011.

Y. S. Jung, J. Lee, Y. Choi, J. Ahn, S. Shin et al., « A study on the in-vitro wear of the natural tooth structure by opposing zirconia or dental porcelain ». The journal of advanced prosthodontics 2, p.111, 2010.

A. S. Kassem and O. Atta, El-Mowafy. « Survival rates of porcelain molar crowns-an update ». The international journal of prosthodontics 23, pp.60-62, 2010.

J. R. Kelly, P. Et, and . Benetti, « Ceramic materials in dentistry: historical evolution and current practice, Australian dental journal, vol.56, issue.1, pp.84-96, 2011.

T. Kern, J. Tinschert, J. Schley, and E. S. Wolfart, « Five-year clinical evaluation of all-ceramic posterior fdps made of in-ceram zirconia ». The international journal of prosthodontics 25, pp.622-646, 2012.

H. Lambert and J. Durand, et M Fages. « Dental biomaterials for chairside CAD/CAM: State of the art, pp.486-95, 2017.

O. Landwerlin, L' empreinte optique intra-buccale et ses applications au cabinet dentaire. Sarrebruck : Éditions universitaires européennes, 2011.

N. C. Lawson, S. Janyavula, S. Syklawer, E. A. Mclaren, and J. O. Burgess, « Wear of enamel opposing zirconia and lithium disilicate after adjustment, polishing and glazing, Journal of dentistry, vol.42, pp.1586-91, 2014.

R. W. Li, T. W. Chow, and J. P. Matinlinna, « Ceramic dental biomaterials and CAD/CAM technology : State of the art », Journal of prosthodontic research, vol.58, pp.208-224, 2014.

P. Limkangwalmongkol, E. Kee, G. J. Chiche, and M. B. Blatz, « Comparison of marginal fit between allporcelain margin versus alumina-supported margin on procera alumina crowns, Journal of prosthodontics, vol.18, issue.2, pp.162-66, 2009.

U. Lohbauer, S. Et, and . Reich, « Antagonist wear of monolithic zirconia crowns after 2 years, Clinical oral investigations, vol.21, issue.4, pp.1165-72, 2017.

A. K. Mainjot, N. M. Dupont, J. C. Oudkerk, T. Y. Dewael, and M. J. Sadoun, « From Artisanal to CAD-CAM Blocks : state of the art of indirect composites, Journal of dental research, vol.95, issue.5, pp.487-495, 2016.

C. Malau and . Cfao, , 2016.

T. Miyazaki, T. Nakamura, H. Matsumura, S. Ban, and T. Kobayashi, « Current status of zirconia restoration, Journal of prosthodontic research, vol.57, issue.4, pp.236-61, 2013.

M. Montazerian, E. D. Et, and . Zanotto, « Bioactive and inert dental glass-ceramics: dental glassceramics, pp.619-658, 2017.

W. H. Mörmann and C. Et, 20 YC Symposium, éd. State of the art of CAD/CAM restorations 20 years of CEREC, 2006.

P. Odman, B. Et, and . Andersson, « Procera AllCeram crowns followed for 5 to 10.5 years: a prospective clinical study ». The international journal of prosthodontics 14, pp.504-513, 2001.

A. Ortorp, M. L. Kihl, and G. E. Carlsson, « A 5-year retrospective study of survival of zirconia single crowns fitted in a private clinical setting, Journal of dentistry, vol.40, issue.6, pp.527-557, 2012.

J. Park, S. Park, K. Lee, K. Yun, and H. Lim, « Antagonist wear of three cad/cam anatomic contour zirconia ceramics ». The journal of prosthetic dentistry 111, pp.20-29, 2014.

J. Pelaez, P. G. Cogolludo, B. Serrano, J. F. Serrano, and M. J. Suarez, « A four-year prospective clinical evaluation of zirconia and metal-ceramic posterior fixed dental prostheses ». The international journal of prosthodontics 25, pp.451-58, 2012.

A. Philipp, J. Fischer, C. H. Hämmerle, and E. I. Sailer, « Novel ceria-stabilized tetragonal zirconia/alumina nanocomposite as framework material for posterior fixed dental prostheses: preliminary results of a prospective case series at 1 year of function, Quintessence international, vol.41, issue.4, pp.313-332, 2010.

V. Preis, M. Behr, G. Handel, S. Schneider-feyrer, S. Hahnel et al., « Wear performance of dental ceramics after grinding and polishing treatments, Journal of the mechanical behavior of biomedical materials, vol.10, pp.13-22, 2012.

A. Rauch, S. Reich, and E. O. Schierz, « Chair-side generated posterior monolithic lithium disilicate crowns: clinical survival after 6 years, Clinical oral investigations, vol.21, issue.6, pp.2083-89, 2017.

S. Reich, M. Wichmann, E. Nkenke, and P. Proeschel, « Clinical fit of all-ceramic three-unit fixed partial dentures, generated with three different CAD/CAM systems ». European journal of oral sciences 113, pp.174-79, 2005.

S. Rinke, N. Gersdorff, K. Lange, and E. M. Roediger, « Prospective evaluation of zirconia posterior fixed partial dentures: 7-year clinical results ». The international journal of prosthodontics 26, pp.164-71, 2013.

C. Ritzberger, E. Apel, W. Höland, A. Peschke, and E. V. Rheinberger, « Properties and clinical application of three types of dental glass-ceramics and ceramics for cad-cam technologies, Materials, vol.3, issue.6, pp.3700-3713, 2010.

M. Roediger, N. Gersdorff, A. Huels, and E. S. Rinke, « Prospective evaluation of zirconia posterior fixed partial dentures: four-year clinical results ». The international journal of prosthodontics 23, pp.141-189, 2010.

N. D. Ruse and M. J. Sadoun, « Resin-composite blocks for dental CAD/CAM applications, Journal of dental research, vol.93, pp.1232-1266, 2014.

M. P. Salido, F. Martinez-rus, F. Del-rio, G. Pradies, M. Ozcan et al., « Prospective clinical study of zirconia-based posterior four-unit fixed dental prostheses: four-year follow-up ». The international journal of prosthodontics 25, pp.403-412, 2012.

M. J. Santos, M. D. Costa, J. H. Rubo, L. F. Pegoraro, and G. C. Santos, « Current all-ceramic systems in dentistry: a review, Compendium of continuing education in dentistry, vol.36, issue.1, p.40, 2015.

O. Schaefer, M. Decker, F. Wittstock, H. Kuepper, and E. A. Guentsch, « Impact of digital impression techniques on the adaption of ceramic partial crowns in vitro, Journal of dentistry, vol.42, issue.6, pp.677-83, 2014.

J. Z. Shen and T. Kosma?, Advanced ceramics for dentistry, 2014.

L. H. Silva, R. Lima, S. Miranda, . Favero, P. Lohbauer et al., « Dental ceramics: a review of new materials and processing methods ». Brazilian oral research 31, n o sup, vol.1, 2017.

A. Soenen, J. Pia, and E. I. Emmanuel, Empreintes conventionnelles versus empreintes optiques pour restaurations céramo-céramiques. » I.D.L'information dentaire 97, pp.49-54, 2015.

F. A. Spitznagel, P. Vuck, M. Gierthmuehlen, S. Blatz, P. Horvath et al., Adhesive bonding to hybrid materials: an overview of materials and recommendations, vol.37, pp.630-667, 2016.

B. Stawarczyk, K. Frevert, A. Ender, M. Roos, B. Sener et al., « Comparison of four monolithic zirconia materials with conventional ones: contrast ratio, grain size, four-point flexural strength and two-body wear, Journal of the mechanical behavior of biomedical materials, vol.59, pp.128-166, 2016.

M. V. Swain, A. Coldea, A. Bilkhair, and P. C. Guess, « Interpenetrating network ceramic-resin composite dental restorative materials, Dental materials, vol.32, issue.1, pp.34-42, 2016.

F. Tabatabaian, Color in zirconia-based restorations and related factors: a literature review: color in zirconia-based restorations, Journal of prosthodontics, vol.27, issue.2, pp.201-212, 2018.

J. Tanrattana, A. Para, and E. L. Jordan, Restaurations coronoradiculaires des dents dépulpées par endocouronnes ». Actualités odonto-stomatologiques, p.283, 2017.

F. Unger, F. Duret, and E. A. Lebras, Concepts cliniques en innovation zircone et CFAO, Editions SNPMD, 2005.

A. Vichi, C. Louca, G. Corciolani, and M. Ferrari, « Color related to ceramic and zirconia restorations: a review, Dental Materials, vol.27, issue.1, pp.97-108, 2011.

P. Vigolo, S. Et, and . Mutinelli, « Evaluation of zirconium-oxide-based ceramic single-unit posterior fixed dental prostheses (fdps) generated with two cad/cam systems compared to porcelain-fused-to-metal single-unit posterior fdps: a 5-year clinical prospective study, Journal of prosthodontics, vol.21, issue.4, pp.265-69, 2012.

A. Willard, T. W. Et, and . Chu, « The science and application of IPS e.Max dental ceramic ». The kaohsiung journal of medical sciences 34, pp.238-280, 2018.